Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Encino, CA
Chimney repair in Encino usually means one of two things: earthquake-era damage from 1994 that was patched but never properly fixed, or an aging clay tile flue on a 1950s ranch that’s finally showing its years. Encino’s housing stock skews older south of Ventura Boulevard, and those original brick fireplaces were built for occasional winter fires, not daily use. We inspect, diagnose, and repair what we find on the spot. Call (855) 382-6159 when you want a straight answer about your flue.
Why Encino Homes Are Different
Encino’s chimneys carry a specific history. The 1940s and 1950s ranch homes south of Ventura Boulevard were framed around open-hearth fireplaces with clay tile flues, and many of those flues took structural hits during the 1994 Northridge earthquake. Some were repaired properly. A lot of them were not. We routinely run a camera down a flue in the 91316 and 91436 ZIP codes and find mismatched tile sections, cracked mortar joints, or crowns that were resealed with the wrong material after a quick post-earthquake patch job.
The climate shapes the work differently here than in colder markets. Encino’s warm, dry weather means creosote buildup is usually light, so a sweep isn’t the heavy-scrape job it is in snow country. The real risk is what happens between dry spells: long periods of zero rain followed by winter storms cause masonry to expand and contract, and that’s when hairline cracks in the crown or flashing start letting water in. Annual inspection in Encino is less about soot and more about catching structural and water-intrusion problems before they turn into a full rebuild.
Styles & brands we work with
Our Main Encino Services
Most Encino homeowners call us for one of two reasons: a chimney that hasn’t been swept in years, or a dryer vent that’s quietly packing lint into a fire hazard. Both are covered by the same crew.
Chimney Sweep in Encino
A proper sweep in Encino starts with an inspection of the flue condition, not just a brush run. Because so many local chimneys have post-1994 repairs or original clay tiles, we check for cracked sections and loose mortar before any sweeping begins. Light creosote from occasional fireplace use is common here, but the sweep also clears out leaf debris, spider webs, and the occasional bird or rodent nest that builds up in unused flues during the long dry season. See Chimney Sweep in Encino for the full breakdown of what a sweep includes and what it costs.
Dryer Vent Cleaning in Encino
A clogged dryer vent is a fire waiting to happen, and Encino’s laundry rooms often route vents through long, awkward runs in single-story ranch homes with limited clearance. Lint accumulates faster when vents have multiple bends or run more than ten feet. We treat dryer vent cleaning as a fire-prevention service, not a quick add-on. The same technicians who understand combustion venting handle the job, and they check the full run from dryer to exterior termination. See Dryer Vent Cleaning in Encino for what to expect.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Encino
Encino’s chimney repair work is dominated by what the 1994 Northridge earthquake left behind and what 60 to 80 years of dry-season expansion and winter rain has done to original clay flue tiles. We find cracked crowns, loose flashing, and flue liners with hairline fractures that only show up under a camera inspection. Because we repair what we find, there’s no handoff to a third party and no second service call. Chimney Repair is our core service, and most of the work we do in Encino falls under it.
Chimney Crown Repair
Signs you need it
You see hairline cracks in the concrete or mortar crown at the top of the chimney, or you notice water staining on the ceiling near the fireplace after winter rains.
What it costs in Encino
Chimney crown repair in Encino typically runs $350 – $750 depending on crown size and whether we’re sealing cracks or rebuilding the crown entirely.
How we do it
We clean and prep the existing crown, fill or rebuild it with the correct crown mortar, and tool a proper drip edge so water sheds away from the flue instead of running down the masonry.
Chimney Flashing Repair
Signs you need it
You see rusted, lifted, or missing flashing where the chimney meets the roofline, or water stains appear on the ceiling after heavy rain.
What it costs in Encino
Chimney flashing repair in Encino runs $300 – $650 on average, more if the roofline has a steep pitch or the flashing was installed wrong originally.
How we do it
We remove the failed flashing, cut and fit new step and counter flashing, and seal the transitions correctly so water can’t track under the shingles or behind the chimney chase.
Chimney Liner Installation
Signs you need it
A camera inspection shows cracked clay tiles, missing mortar joints, or a flue that’s no longer sized correctly for the appliance venting into it.
What it costs in Encino
Chimney liner installation in Encino typically falls between $1,500 and $3,500 depending on flue height, accessibility, and whether we’re installing a DuraFlex stainless flexible liner or rebuilding with rigid sections.
How we do it
We run a camera to confirm the flue condition, size the liner to the appliance and flue dimensions, then install the liner with proper insulation and top and bottom terminations so the system drafts correctly and meets current code.
Chimney Cap Installation
Signs you need it
You don’t have a cap, the existing cap is rusted through or missing, or you’ve had birds, squirrels, or rain getting down the flue.
What it costs in Encino
Chimney cap installation in Encino runs $180 – $410 depending on flue size and whether you need a standard single-flue cap or a custom multi-flue cover.
How we do it
We measure the flue opening, select a stainless or copper cap that fits the tile dimensions, and secure it to the flue so it keeps out rain, animals, and debris without restricting draft.
What Chimney Repair Costs in Encino
| Item | Typical range in Encino |
|---|---|
| Chimney crown repair | $350 – $750 |
| Chimney flashing repair | $300 – $650 |
| Chimney liner installation | $1,500 – $3,500 |
| Chimney cap installation | $180 – $410 |
Do I really need a camera inspection before a repair quote?
Yes. Without a camera run, any quote is a guess. Half the chimneys we open up in Encino have earthquake-era damage or mismatched tile sections that a visual inspection from the roof can’t reveal. The camera shows exactly what’s cracked, what’s loose, and what can safely stay.
Can you repair earthquake damage without rebuilding the whole chimney?
Often, yes. If the structural masonry is sound but the flue liner has cracked mortar joints or hairline fractures, HeatShield resurfacing can restore the flue interior without a full rebuild. If the liner is too far gone, a DuraFlex stainless liner gives you a code-compliant venting path without tearing down the chimney. Call (855) 382-6159 for an honest assessment.
Brands We Service in Encino
We work with contractor-grade materials from DuraFlex, HeatShield, Gelco, and Olympia Chimney, the same lines stocked in professional supply houses. Most common caps, liners, and crown materials are available for Encino jobs without special-order delays. For the full list, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Encino, CA
| Service | Typical range in Encino |
|---|---|
| Chimney sweep | $160 – $290 |
| Chimney crown repair | $350 – $750 |
| Chimney flashing repair | $300 – $650 |
| Chimney liner installation | $1,500 – $3,500 |
| Chimney cap installation | $180 – $410 |
| Dryer vent cleaning | $90 – $160 |
Prices in Encino push toward the higher end when we’re working on a two-story roofline with steep pitch, or when a chimney sits on an exterior wall with decades of deferred maintenance. Every quote is given upfront before work starts, and we don’t add charges once we’re on the roof.
Neighborhoods We Serve in Encino
We work across all of Encino’s residential pockets, from the ranch-home blocks south of Ventura Boulevard to the hillside estates and newer Mediterranean-style builds further north.
- Encino Village
- Encino Park
- Amoa Park area
- Hayvenhurst corridor
- Encino Hills
Response time across the 91316, 91416, 91426, and 91436 ZIP codes is typically a week or less for standard sweeps and inspections, with repair scheduling dependent on what the camera inspection turns up.
Service Area – Cities Near Encino
We also cover neighboring San Fernando Valley communities. If you’re in Sherman Oaks, CA, Van Nuys, CA, Valley Glen, CA, or Northridge, CA, the same crew covers your chimney, liner, and dryer vent work.
Serving Encino, CA — Our Local Coverage Area
We’re based in the Encino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Encino
Most Encino properties can be scheduled within a week for a standard chimney sweep or inspection. Repair work depends on what the camera inspection shows and which materials are needed, but we’ll give you a clear timeline at the quote.
Some Encino HOA-governed communities require written approval for exterior work, including chimney caps and visible repairs. We’ll flag that early and can provide material specs and a scope of work if your HOA needs documentation before green-lighting a job.
Yes. We cover 91316, 91416, 91426, and 91436, from the flat ranch blocks south of Ventura Boulevard to the hillside estates in the north. One crew handles the whole area, so there’s no gap in coverage or subcontracted work. Call (855) 382-6159 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Encino Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Raj Patel"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Megan Sullivan"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Laura Gallagher