Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Artesia
If you own a home in Artesia built between the 1950s and 1970s, your chimney is now 50 to 75 years old. A chimney sweep in Artesia typically costs $189 – $269, and for homes along Pioneer Boulevard, South Street, and the surrounding residential grid, we’re usually on site within one to two business days. Most of the fireplaces we service in the 90701 and 90702 zip codes have original clay-tile flue liners that haven’t been inspected in years. Call us at (855) 382-6159 and we’ll tell you what you’re actually looking at before any work begins.
Why Corona Chimney Sweep Is Artesia’s Preferred Chimney Sweep Company
Our Chimney Sweep team works Artesia as a core service area, not an occasional trip. Nolan Ferris built this company on a simple rule that applies directly to this city’s housing stock: don’t recommend a liner, a crown, or a repair unless the customer can see the damage on camera. That matters in Artesia because so many homes here have original masonry chimneys that are structurally sound but carry decades of creosote and deteriorating mortar joints. We repair what we find, in-house. No referral to another contractor and no waiting on a handoff.
Artesia’s compact footprint means we can route multiple stops in one day through 90701 and 90702 without sacrificing thoroughness. Technicians who work this city regularly know the tight side-yard access along Pioneer Boulevard, where ladder placement is constrained by property lines and commercial frontage mixing into residential lots. That local knowledge keeps us fast and keeps the job safe.
What we hear from Artesia homeowners is consistent: the fireplace was used a few times years ago, then forgotten. Then a pre-sale inspection flagged the chimney, or the first cold night brought smoke pouring back into the living room. We’ve handled both scenarios across this city many times, and we show you the footage before you spend a dollar on repair.
Styles & brands we work with
Chimney Maintenance in Artesia
Chimney Maintenance in Artesia means something different here than in cities with heavy seasonal burning. Because Artesia sits in the LA Basin with hot, smoggy summers and mild winters, fireplaces see occasional use at most. Creosote accumulates slowly, but it also goes unnoticed for years. A maintenance visit in Artesia typically runs $149 – $199 and includes a Level 1 inspection, soot and light creosote removal, and a visual check of the mortar crown, cap, and damper assembly.
We recommend annual maintenance even if you burn rarely. The issue in Artesia isn’t heavy creosote from constant burning. It’s slow deterioration of mortar joints and clay tiles that nobody notices until smoke spills or a home inspector opens the damper for the first time in a decade.
Level 1 Inspection With Every Maintenance Visit
Every maintenance call includes a Level 1 inspection per NFPA 211. We check the flue path from the firebox to the termination, the damper operation, and accessible masonry. On 1950s and 60s ranch homes in Artesia, this is often the first time a camera has been in the chimney since the house was built.
Dryer Vent Fire Prevention
A clogged dryer vent is a fire waiting to happen. In Artesia’s older single-story homes, dryer vent runs are often short but poorly maintained, with lint packed behind the dryer and at the exterior termination. We clean dryer vents on the same visit, using the same technician trained in combustion venting, not a separate crew.
Chimney Sweep Services in Artesia
Chimney Sweep Services in Artesia focus on creosote removal from older masonry flues. A standard sweep in Artesia runs $189 – $269, depending on flue height, creosote staging, and whether we’re addressing a clay-tile liner or an unlined stack. First-degree creosote brushes out cleanly. Second-degree and third-degree deposits, which we find regularly in 50-plus-year-old homes here, require rotary chain tools and sometimes chemical treatment before brushing.
Our sweeps in Artesia always include camera verification. We do not brush blind. After the sweep, you see the flue interior on our monitor, from the smoke shelf to the cap. That footage is your record and our proof.
Creosote Removal in Aging Masonry Chimneys
On a 1958 ranch near Pioneer Boulevard, we recently found second-degree creosote in the smoke chamber and a hairline crack running vertically through a clay-tile liner. The homeowner hadn’t burned in years but had scheduled a sweep because a pre-sale inspection flagged the chimney. We removed the creosote, showed the crack on camera, and talked through the repair options without pressure. The liner crack was addressed with HeatShield resurfacing, which we’ll cover later.
Fireplace Cleaning That Reveals What’s Behind the Wall
Fireplace cleaning in Artesia nearly always reveals something worth documenting. Dampers rusted open, smoke shelves packed with soot, mortar crowns spalling from years of dry LA Basin heat and the occasional Santa Ana wind event. We clean the firebox, remove soot and debris from the smoke chamber, and report what we see in plain language.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Artesia
We install and service components from professional-grade brands, the same lines stocked at contractor supply houses, not big-box substitutes. When a home in Artesia needs a flexible liner, we install DuraFlex stainless steel systems, which handle the tight offsets and irregular flue paths common in mid-century masonry chimneys. When a flue shows deteriorated mortar joints or hairline cracks that haven’t compromised the structure, we use HeatShield resurfacing to restore the interior without a full liner replacement. For caps, dampers, and termination components, we keep Olympia Chimney and Gelco parts on the truck, so most repairs in Artesia don’t require a second trip.
Common Chimney Sweep Problems We See in Artesia Homes
- Cracked clay-tile flue liners: Artesia’s 1950s-70s homes were built with clay-tile liners that expand and contract through decades of LA Basin heat cycles. Hairline cracks let creosote and combustion gases seep behind the liner, a fire hazard that only a camera inspection catches.
- Backdrafting and smoke spill on cold nights: Original dampers and smoke shelves on mid-century fireplaces were never designed for tight, modern homes. When Artesia gets a rare cold snap and residents finally light a fire, smoke rolls into the living room instead of up the flue.
- Appliances vented into stacks not built for them: Furnaces and water heaters tied into old masonry chimneys can backdraft carbon monoxide, especially in single-story ranches where the chimney is short and draft is weak. This is a combustion venting problem most sweep-only crews aren’t trained to diagnose.
- Spalling mortar crowns from dry heat and Santa Ana winds: Artesia’s climate is dry but punctuated by wind events that wear at exposed mortar. Cracked crowns let water into the masonry, and we frequently find this on homes where the crown hasn’t been sealed since the house was built.
See the difference
Before
After
Before
After
Before
AfterKey Takeaways for Artesia Homeowners
- A chimney sweep in Artesia averages $189 – $269, and we service all of 90701 and 90702.
- The biggest chimney problems in Artesia come from deferred maintenance on 50-70 year old masonry fireplaces, not heavy seasonal burning.
- We repair what we find, in-house. No handoffs to a third-party contractor.
- Every recommendation we make is backed by camera footage you review with us.
- Call (855) 382-6159 for a free estimate. We’ll tell you what you need, and just as importantly, what you don’t.
Pricing for Chimney Sweep in Artesia, CA
Here’s what Artesia homeowners should expect to pay. A Level 1 inspection with a standard sweep runs $189 – $269 on a single-flue masonry chimney. If we’re pulling a Level 2 inspection, which uses full camera documentation of the interior flue, add $100 – $175. Creosote removal on second-degree or third-degree buildup adds $75 – $150 depending on flue length and whether chemical treatment is required. Dryer vent cleaning runs $99 – $149 as a standalone service, with a discount applied when added to a chimney sweep. Repair costs depend entirely on what the camera shows. A stainless steel cap replacement might run $225 – $400 installed, a HeatShield resurfacing job on a standard flue typically falls between $1,200 and $2,400, and a full DuraFlex liner installation starts around $2,800. Call (855) 382-6159 for an exact quote. Estimates are free.
We Also Serve Cities Near Artesia
Beyond Artesia, we run daily routes through Cerritos, La Palma, Hawaiian Gardens, and Norwalk. The same technicians, the same camera-verified process, and the same straight answers. If you’re in a neighboring city with a mid-century home and a fireplace that hasn’t been checked in years, call us at (855) 382-6159.
Serving Artesia, CA — Our Local Coverage Area
We’re based in the Artesia area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Artesia
Expect creosote accumulation, possibly second-degree or worse, plus deteriorated mortar joints in the clay-tile liner. On a first visit to a 1950s Artesia home, we run a camera through the flue and show you exactly what’s there. Most of these chimneys have never been inspected, and most are serviceable. A full sweep plus Level 1 inspection runs $189 – $269. Call (855) 382-6159 to schedule.
Once a year, even with light use. Artesia’s climate means creosote builds slowly, but mortar deterioration and water intrusion from dry heat and Santa Ana winds continue whether you burn or not. Annual inspection catches cracking before it becomes a repair, and a maintenance visit costs less than a reactive sweep. We’ll tell you plainly if your chimney can safely go longer.
First-degree creosote is a light, flaky soot that brushes out easily. Second-degree is a hardened, tar-like glaze that requires rotary tools and takes real labor to remove. Third-degree is a dense, glassy deposit that can require chemical treatment before brushing. In Artesia, we most often find second-degree creosote in chimneys that have been used intermittently for decades without a sweep. The staging determines cost and time. We show you the creosote on camera before we start and after we finish.
Yes, and it’s usually one of two causes: a partially closed or rusted damper, or a flue that’s too cold and short to establish draft. Homes in Artesia built in the 1950s and 60s have masonry chimneys sized for open fireplaces, but when the fire hasn’t been lit in years, the flue is cold and the smoke has no rise. A sweep and a draft assessment usually fix it. Call (855) 382-6159 and we’ll run the camera and tell you what’s actually happening.
Yes. Tight side-yard access along Pioneer Boulevard and the surrounding streets is a known condition for us, not a surprise. We carry roof-safe equipment sized for narrow property lines and we route the ladder setup accordingly. It’s one reason we service Artesia as a core city rather than treating it as an add-on stop.
Written by Nolan Ferris, Owner at Corona Chimney Sweep, serving Artesia since our first route through the city.