Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Redlands
A chimney sweep in Redlands typically costs $189 – $329 for a standard cleaning with a Level 1 inspection, and most jobs are completed in under two hours. If you’re in 92373, 92374, or 92375 and haven’t had your flue checked in a couple of years, that’s the range you’re looking at. Call (855) 382-6159 and we’ll schedule a time that works. Our crews know Redlands streets well, from the tree-lined blocks downtown to the tract homes off San Bernardino Avenue, so we’re not guessing at your house’s age or what’s behind the damper when we arrive.
Why Corona Chimney Sweep Is Redlands’s Preferred Chimney Sweep Company
We’re not a sweep-only crew. We repair what we find. That matters in Redlands more than almost anywhere else in the Inland Empire, because so many of the chimneys here date to the 1910s and 1920s. A standard clean-and-leave outfit will sweep your flue and hand you a referral card when the camera shows cracked clay tile or spalling mortar. We carry the repair materials on the truck. Nolan Ferris built Corona Chimney Sweep around eliminating that handoff gap, and DuraFlex in Redlands homeowners notice when the same technician who finds a problem is the one who fixes it the same day.
Our Chimney Sweep team works Redlands every week, not occasionally. That means we know the difference between a 1920s Craftsman chimney on Cajon Street and a 1970s tract fireplace in the Sunset Drive area before we even knock. Redlands customers tell us the same thing: they’d rather deal with one company that can camera, sweep, repoint, and cap than juggle two or three vendors. We agree.
Styles & brands we work with
Chimney Sweep Certified in Redlands
Chimney Sweep Certified work in Redlands starts with a camera inspection, not a brush. That’s the honest order of operations for older masonry. A standard sweep here runs $189 – $329 and includes a Level 1 inspection and full flue brushing. But on a 100-year-old stack, the sweep itself is almost secondary. The camera run tells us whether the clay tile liner is intact, whether the mortar joints in the smoke chamber are sound, and whether the crown is doing its job. We don’t put a brush up an unlined flue until we’ve seen the inside on video.
Camera-First Protocol
Every Redlands chimney gets visual documentation before any cleaning begins. If the liner is cracked or the mortar is failing, sweeping alone won’t fix it and can actually make a bad situation worse by loosening debris that was holding things together. We show you the footage.
Creosote and Soot Removal in Older Stacks
Creosote removal in Redlands runs $150 – $250 as a standalone service. But the real issue in 92373-era chimneys is the buildup you can’t see: a third-degree glazed creosote layer on the flue walls. That’s not a matter of brushing harder. It’s a material condition that may require a resurfacing decision, and we’ll show you the scope on camera before any recommendation is made.
Gas Fireplace Cleaning in Redlands
Gas Fireplace Cleaning in Redlands covers a lot of homes in the 92374 and 92375 zip codes, where the housing stock skews toward 1960s – 1980s builds with factory-built metal fireplaces and gas logs. A gas fireplace cleaning starts at $145 – $220, depending on whether it’s a vented or vent-free unit. People assume gas means zero maintenance. It doesn’t. Soot accretes on the logs and burner, glass fogs, and sensors get coated. A gas fireplace that burns dirty is sending particulates into the room, and that’s a combustion venting issue like any other.
Burner and Pilot Assembly Service
We pull the logs, clean the burner ports, check the pilot assembly, and vacuum the control cavity. Most of the gas fireplaces we see in Redlands tract homes have never been opened since installation. The burn pattern tells us a lot about gas pressure and venting efficiency.
Glass and Media Cleaning
We use a non-abrasive cleaner on ceramic glass and vacuum the ember media and rock wool. If the glass has a film on the inside, that means combustion isn’t venting properly. We’ll check the flue and termination cap as part of the service, because a gas fireplace is still a vented appliance even when it’s prettier than a wood fire.
Trusted Brands We Service in Redlands
We install and service materials from six vetted, contractor-grade lines: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. These aren’t big-box substitutes. They’re the same product lines stocked in professional contractor supply houses. When we install a HeatShield resurfacing system in a 1920s Redlands flue, or pull a DuraFlex stainless flexible liner for a retrofit, we’re using materials that code inspectors and chimney professionals recognize. Chimney Sweep in Redlands work from our crews always includes a clear explanation of which material we’re using and why, so you’re not guessing about what went into your house.
Common Chimney Sweep Problems We See in Redlands Homes
- Unlined or clay-tile flues in pre-1930 homes. The 92373 core has a high concentration of original brick stacks with no cap and clay tile inserts. After a dry Redlands summer, we routinely pull bird and squirrel nests out of these before any sweeping can begin.
- Spalling mortar in smoke chambers. Lime mortar from a century ago doesn’t hold up to modern fire temperatures. We see cracked and crumbling joints on nearly every older Craftsman we open, and it has to be addressed before the flue is safe.
- Santa Ana downdrafts and debris. Uncapped flues on older Redlands homes catch wind-blown debris from the fall Santa Ana events. That debris sits in the flue and smolders on the first fire of the season.
- Third-degree creosote glaze. This one’s more common in 92374-era tract homes where unseasoned wood or frequent low-temperature fires have baked a hard, shiny creosote layer onto the flue. Brushing won’t remove it. HeatShield resurfacing or a liner decision is usually required.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Redlands, CA
A standard chimney sweep in Redlands runs $189 – $329. A gas fireplace cleaning starts at $145 – $220. Creosote removal as a standalone job falls between $150 – $250. Camera inspection is included with every sweep and runs $99 – $150 when booked separately. What moves the price in Redlands is access: two-story roofs, steep pitches on the older homes near downtown, and flues that haven’t been serviced in decades. If we find repointing, cap installation, or HeatShield resurfacing needs, we’ll show you the camera footage and give you a written quote before any repair work starts. Call (855) 382-6159 for a free estimate, and we’ll give you a number that holds.
We Also Serve Cities Near Redlands
Our crews run routes through Mentone, Loma Linda, Highland, and Colton every week alongside our Redlands work. If you’re on the edge of 92374 or closer to the county line, we can usually combine your visit with an existing route and get you scheduled faster. We also do full Redlands coverage across all three ZIP codes.
Serving Redlands, CA — Our Local Coverage Area
We’re based in the Redlands area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Redlands
No, not without a camera inspection first. An unlined brick flue in a 1920s home is exactly the type of chimney that hides cracked masonry and missing mortar joints. Sweeping it blind risks loosening structural debris. We always run a Level 2 camera inspection before touching an unlined flue, and we’ll show you the footage so you know what you’re actually dealing with. Call (855) 382-6159 to schedule the inspection.
Because so many of them are 80 – 130 years old and were built for wood or oil smudge pots, not modern hot-burning fires. The original lime mortar and clay tile liners deteriorate under modern use, so a standard sweep without a structural assessment misses the actual risk. Our Redlands sweeps include that assessment as part of the job, not as an add-on.
Once a year if you burn wood regularly, and before the first fire of the season after a long Redlands summer. The dry months let soot cake and critters nest, and the first cold snap triggers a rush of calls. If you’ve skipped a few years, start with a Level 2 inspection rather than just a sweep. Call (855) 382-6159 to get on the schedule before the fall rush.
Yes. We service factory-built metal fireplaces and gas log sets throughout 92374 and 92375. Most of these units have never been properly cleaned, and a dirty burner or coated sensor affects combustion quality. Gas fireplace cleaning starts at $145 – $220, and we’ll check the venting path as part of the service.
First-degree creosote is a soft, flaky soot that brushes out with a standard sweep. Third-degree creosote is a hardened, glazed layer that forms from repeated low-temperature fires and won’t come off with a brush. It’s a fire hazard and often requires HeatShield resurfacing or a liner decision. We’ll show you exactly which type you have on camera before recommending anything. Call (855) 382-6159 for a free estimate.
One Local Insight That Changes How We Work Here
Redlands’ 92373 core has a high concentration of 1890s – 1930s Craftsman and Tudor homes whose original brick fireplaces were built for wood or oil smudge pots, not modern hot-burning fires. That means most chimney sweeps here require repointing and camera inspection before any cleaning can safely begin. This isn’t a sales pitch. It’s what the housing stock demands. The smudge-pot era left Redlands with chimneys that were designed for low-temperature oil fires, not the sustained heat of a modern wood fireplace. The original lime mortar breaks down, the clay tile liners crack, and the crowns erode under decades of Santa Ana wind and dry heat. A company that sweeps first and inspects later is doing Redlands homes a disservice. We inspect first, show you the footage, and sweep only when the flue is actually safe to clean.
On a tree-lined street in the 92373 core, our tech pulled a squirrel nest and a cracked clay tile from a 1920s Craftsman chimney during a Level 2 inspection. The camera showed spalling mortar joints in the smoke chamber and a missing chimney cap that had let in years of debris. We repointed the firebox, installed a new cap, and swept the flue, but only after showing the homeowner the live video feed and getting approval for each step. That’s how it should work. You see what we see.
The most common failure mode we run into in Redlands? Sweeping an unlined or clay-tile flue without camera inspection, hiding cracked tiles that can let heat reach framing. Or recommending relining based on a quick visual glance, rather than showing the homeowner Level 2 inspection footage of spalling mortar or third-degree creosote glaze. And skipping the chimney crown and flashing check on 100-year-old stacks, where Santa Ana winds and dry summers accelerate mortar deterioration. We don’t skip any of it, and we don’t upsell what the camera doesn’t find.
Written by Nolan Ferris, Owner at Corona Chimney Sweep, serving Redlands and the surrounding Inland Empire.