Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Campo
A clogged dryer vent in Campo typically costs between $145 and $235 to clean professionally, and the job takes 60 to 90 minutes on most rural properties. That’s the direct answer. What matters more is this: we work on Campo homes where dryer vents share wall space with wood stoves, where pack rats move into vent hoods every winter, and where a simple lint clog can turn into a fire hazard faster than most homeowners realize. If your dryer is taking two cycles to dry a load, call us at (855) 382-6159 and we’ll come out and clear it.
We know the roads out here. We drive them regularly. The properties off Buckman Springs Road, the acreage up near Lake Morena, the older cabins scattered across Campo’s backcountry. Every job requires the same thing: a technician who understands that rural vent systems don’t get serviced on a coastal schedule. They get serviced when they’re clogged, damaged, or leaking. And by the time you notice a problem, it’s usually been developing for months.
Why Corona Chimney Sweep Is Campo’s Preferred Dryer Vent Cleaning Company
We’re not a franchise crew that shows up once and disappears. We’re a full-service venting company based in Corona, and we work Campo regularly enough to know what to expect before we arrive. That matters when you live at the end of a dirt driveway off an unmarked road. We don’t need directions explained twice.
Our Dryer Vent Cleaning team handles the same scope of work in Campo that we handle everywhere else: cleaning, repair, and installation. But the reason Campo homeowners call us specifically is that we understand the backcountry. Wood smoke means creosote. Creosote means sticky, stubborn lint deposits that a standard vacuum won’t pull out. We bring the right brushes, the right rods, and the right pest management approach.
Nolan Ferris runs our crew with a simple rule: if you find a problem, you fix it. That applies to dryer vents the same way it applies to chimney liners. A corroded vent hood isn’t something we note and walk away from. We replace it. A sagging plastic duct isn’t a recommendation we leave on a clipboard. We cut it out and run proper rigid metal duct. Nolan has built the company around the idea that finding and fixing happens in one visit, and that’s what Campo gets from us.
We also serve manufactured homes without blinking. Campo has plenty of them, and they come with vent systems that were installed cheaply and poorly from day one. Foil ducting, undersized hoods, vents that terminate under the house instead of through the wall. We’ve seen all of it. We repair it properly, and we don’t make you feel like an afterthought because you don’t live in a stick-built house.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Campo
Dryer Vent Cleaning
A Campo dryer vent accumulates lint faster than a coastal vent because dryers run more often in a wood-heated home. Cold nights mean more laundry cycles. More cycles mean more lint. Add in the fine dust that comes with living on rural acreage, and you get a vent that needs attention every 12 to 18 months, not every 3 years. We brush the entire run with rotary tools sized for residential ducts, then vac out everything the brush breaks loose. We finish with a pressure test so you know airflow is right, not just “looks cleaner.”
Dryer Vent Installation
Rigid metal duct, properly supported, with a pest-resistant termination hood. That’s what we install in Campo. No plastic, no foil, no flexible tubing that sags and collects lint in the low spots. New construction, remodel, or a replacement for duct that’s failed. We’ll route it the way it should have been done originally, seal the wall penetration properly, and test the final airflow before we leave. If you’re in an older manufactured home with foil ducting, this is the service that actually fixes your problem permanently.
Dryer Vent Repair
Damaged hoods and flashing are common in Campo. Inland weather is harsher than people think: freeze-thaw cycles, hard rain, and the occasional snow that sits on a roof for days. Hoods corrode. Flappers stop flapping. Flashing pulls away from the wall and lets water in. We replace damaged components with metal models that actually survive high-desert conditions. We also repair duct runs that have separated at the seams, which happens in manufactured homes where the structure shifts with temperature swings.
Dryer Vent Inspection
If you’re not sure whether your vent needs cleaning, start here. We inspect the entire run, check airflow at both ends, and document what we find with photos. If the vent is clean, we’ll tell you. If it needs work, you’ll see the photos for yourself before you pay for anything. This is the smart first step for anyone who just bought a Campo property and doesn’t know what’s hiding in the walls.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Campo
We install and service components from the same professional-grade lines we use on chimney work: Olympia Chimney termination hoods, Gelco ducting components, and DuraFlex flexible connector systems where a rigid run won’t physically fit. These aren’t big-box substitutes. They’re what you’ll find in contractor supply houses, and they hold up to Campo’s conditions in a way cheap hardware store hoods simply won’t. Snapped flapper hinges and rusted-out louvers are the two most common hood failures we see on rural properties, and both are almost always the result of thin-galvanized parts that were never built for inland weather. We replace them with pest-resistant metal models that last.
Common Dryer Vent Cleaning Problems We See in Campo Homes
- Rodent and bird nests in vent terminations. Cold nights drive pack rats and birds into vent hoods, and a dryer that runs hot is an attractive place to build a home. We pull nests out regularly, then install a hood with a tight-closing flapper and a pest screen to keep them out.
- Lint mixed with creosote. If your dryer is in a utility room near a wood stove or shares a wall with a masonry chimney, fine creosote dust settles on the lint inside your vent run. It acts like glue, turning loose lint into a sticky, hard layer that standard vacuums won’t move. This is a Campo-specific problem we handle with chimney-grade rotary brushes.
- Plastic and foil ducting that sags and traps lint. Older manufactured homes are full of this. It was code-compliant when installed, but it doesn’t hold up. Low spots collect lint and moisture, airflow drops, and drying times climb. We replace it with rigid metal duct.
- Improperly sealed penetrations through adobe and masonry walls. Campo has older structures with thick walls. When a vent passes through adobe or masonry without proper sealing, lint escapes into the wall cavity. The vent looks fine from outside, but the inside is a mess. We seal the penetration correctly and verify the entire run is airtight.
See the difference
Before
After
Before
After
Before
AfterPricing for Dryer Vent Cleaning in Campo, CA
We Also Serve Cities Near Campo
We work throughout the mountain backcountry of San Diego County. You’ll find us cleaning dryer vents in Pine Valley, Descanso, Alpine, and Harbison Canyon on a regular basis. If you’re just outside Campo on county land or fire roads, call us. We cover all of the 91906 ZIP code and the surrounding communities.
Serving Campo, CA — Our Local Coverage Area
We’re based in the Campo area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Campo
How often should dryer vents be cleaned in Campo, CA?
Every 12 to 18 months. Campo’s cold winters mean dryers run nearly every day, and the fine dust from rural acreage plus creosote particles from wood-burning appliances creates a heavier lint load than you’ll find in city homes. If you have a wood stove in the house, err toward 12 months. Call (855) 382-6159 to schedule and we’ll get you on the calendar.
Why is my dryer taking longer to dry clothes in Campo?
You almost certainly have a restricted vent. The restriction is usually a combination of lint buildup and either a pest nest or a collapsed section of duct. In Campo, we find rodent nests more often than anywhere else we work. The colder the nights, the more pack rats want in. A pressure test tells us exactly how restricted the vent is, and the fix is usually a full cleaning plus a better hood. Call us and we’ll diagnose it in one visit.
Can you clean dryer vents in manufactured homes in Campo?
Yes. We work on manufactured homes all the time, and we know the ducting that comes with them: foil, plastic, and undersized. We clean what’s cleanable, and if the duct is beyond saving, we replace it with rigid metal. Older manufactured homes often have vents that terminate under the skirting, which is a code violation and a fire hazard. We reroute those properly. Call (855) 382-6159 and we’ll take a look.
What signs indicate a clogged dryer vent in a Campo home?
Clothes take two or more cycles to dry, the dryer feels unusually hot to the touch, the laundry room gets humid while the dryer runs, or you notice a burning smell during the cycle. Outside, the vent hood may have little or no airflow when the dryer is running, or the flapper may be stuck open. If you notice any of these, stop using the dryer and call us. A clogged dryer vent is a fire waiting to happen.
Do you offer dryer vent repair or installation in Campo?
Yes, and it’s a core part of what we do. We replace damaged hoods, corroded flashing, and failed duct runs. We install new rigid metal vent systems in new construction and retrofits, including homes where the original vent was never properly routed. If we find a problem while cleaning, we can usually repair it the same day because we keep common parts on the truck. Call (855) 382-6159 and we’ll walk you through what you need.
Contact Corona Chimney Sweep in Campo
If your dryer vent hasn’t been cleaned in over a year, or you’re noticing longer drying times, don’t wait until the vent is completely blocked. Call us at (855) 382-6159 for a free estimate. We’ll schedule a time that works for you, show up with the right equipment for Campo’s rural properties, and leave you with a vent that moves air the way it should. Nolan Ferris and the rest of us at Corona Chimney Sweep have been doing this work long enough to know that a vent you never think about is a vent that’s working.
Written by Nolan Ferris, Owner at Corona Chimney Sweep, serving Campo since the company’s founding.