Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Encino
Dryer vent cleaning in Encino typically costs $140 – $240 for a standard single-story home, with two-story or long-run vents running $180 – $320 depending on access. Most jobs take 60 – 90 minutes. We work across Encino weekly, so scheduling is usually a matter of days, not weeks. Our techs know the difference between a 1950s ranch off Ventura Blvd and a 1990s Mediterranean rebuild on a hillside, because the vent runs are nothing alike. Call (855) 382-6159 for a free estimate before you run another load.
Why Corona Chimney Sweep Is Encino’s Preferred Dryer Vent Cleaning Company
Encino homeowners don’t need a national franchise rolling into the Valley with no idea what’s behind the stucco. They need someone who knows that half the dryer vents in this part of Encino were run through chase walls during rushed 1980s and 1990s rebuilds, and that earthquake settling cracked more than a few of them. That’s the kind of local knowledge that changes how we inspect and clean. We don’t just shove a brush down the line and call it done.
Our Dryer Vent Cleaning team treats every job in Encino as a fire-prevention inspection first. Lint is the obvious enemy, but disconnected ductwork and crushed pipe behind stucco are the ones that fill wall cavities with combustible material no one can see. We run a camera before and after. You see exactly what we see. If it’s dirty, you’ll see the before and after footage. If it’s broken, you’ll see the crack. No mystery recommendations, no upsell without evidence.
Nolan Ferris built this company around the idea that cleaning and repair should live under one roof. When we find damaged vent pipe in an Encino laundry room, we fix it that day if parts are on the truck, or schedule the repair before we leave. You’re not waiting for a second company to show up. One call, one provider, every venting hazard handled.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Encino
We offer dryer vent inspection, cleaning, and repair across all Encino zip codes: 91316, 91416, 91426, and 91436. Each service below is performed by technicians trained in combustion venting, which matters more than people realize when dryer exhaust shares a chase with a water heater or furnace flue.
Dryer Vent Inspection
An inspection in Encino starts with the exterior vent cap at the stucco or roof line, then moves inside to the connection at the dryer and everything in between. We look for crushed sections, disconnected joints, bird or rodent intrusion, and lint accumulation. Camera footage is included. You get to see the inside of the vent run, not a verbal summary. In Encino’s older homes, we pay special attention to vent runs that pass through walls where earthquake repairs may have shifted framing or separated duct connections.
Dryer Vent Cleaning
We clean the full run from the dryer connection to the exterior termination point using rotary brushes sized to the duct. Encino’s dry climate means the lint itself is often drier and more friable than in coastal areas, which sounds harmless until you realize that dry lint ignites faster. Good airflow restoration is the measurable result: dryer cycles shorten, clothes dry on the first run, and the exterior damper flutters open properly instead of staying stuck under lint weight. Most Encino homes need this every 12 to 18 months depending on household size and how often the dryer runs.
Dryer Vent Repair
When we find disconnected or crushed ductwork in Encino, we repair it. Not a referral, not a handoff. We carry rigid and semi-rigid duct sections, elbows, foil tape, and replacement dampers on the truck. In many 1980s and 1990s rebuilds around Encino, the original installers used white flexible vinyl hose, which is flammable and no longer allowed under current code. We replace it with rigid metal duct the same day. If the vent run needs a route change, we’ll show you the photo evidence and walk through the options before cutting anything open.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Encino
We install and service vent components from the same professional-grade lines contractors source, not what’s on a big-box shelf. That includes Olympia Chimney dampers and caps, Gelco termination fittings, and HeatShield in Encino when a dryer vent’s shared masonry chase needs interior resurfacing rather than full replacement. If you’ve had vent work done before and you’re not sure what’s in there, we’ll identify it during the inspection and tell you honestly whether it’s holding up or failing. Stocking these lines means most repairs in Encino don’t wait on a parts order.
Common Dryer Vent Cleaning Problems We See in Encino Homes
- Lint blowback into the laundry room: A clogged or crushed vent line sends lint backward through the dryer cabinet instead of outside. We see this consistently in Encino’s 1950s ranches where the original vent run was built for a shorter, weaker dryer and never upgraded when the old one was replaced.
- Crushed ductwork behind stucco: Post-1994 Northridge earthquake repairs in Encino sometimes left duct runs pinched between framing and new stucco. The exterior looks fine. The interior vent flow is cut by half or more. Only a camera shows it.
- Disconnected joints in hillside homes: Encino estates and hillside properties often have longer vent runs with multiple joints. Seismic settling plus thermal expansion shakes these connections loose over time. Lint escapes into wall and ceiling cavities, which is a fire hazard that builds invisibly.
- Rusted or stuck exterior dampers: Encino’s dry heat bakes plastic dampers until they warp, and winter rain rusts metal ones. A stuck damper means the vent never seals, and birds or rodents move in during summer. We replace these on nearly every other call in 91316 and 91436.
Pricing for Dryer Vent Cleaning in Encino, CA
Here’s what Encino homeowners can expect to pay, based on what we regularly quote in this market:
- Single-story home, standard roof or wall vent, accessible duct: $140 – $180
- Two-story home or long horizontal run (20 feet or more): $200 – $260
- Roof vent access requiring ladder work or steep pitch: $250 – $320
- Camera inspection add-on (if not bundled): $60 – $90
- Dryer vent repair (disconnected joint, crushed section, damper replacement): $120 – $350 depending on material and access
These are the ranges you’ll see in Encino, not a bait quote that doubles on arrival. The main variables are run length, roof pitch, and whether the vent terminates at the roof or wall. We quote flat pricing before any work starts. Call (855) 382-6159 for a free estimate based on your specific setup.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Encino
Our service area extends across the San Fernando Valley. If you’re in Sherman Oaks, Van Nuys, Valley Glen, or Northridge, the same Dryer Vent Cleaning in Encino team covers your neighborhood too. Same pricing structure, same camera-verified process, same one-call repair capability.
Why Dryer Vent Work in Encino Is Different
Encino sits in the San Fernando Valley, where the housing stock splits into two eras that both create venting problems for different reasons. South of Ventura Blvd, you’ll find 1940s and 1950s ranch homes, many with the original brick chimneys and clay tile flues. Those homes were built with laundry rooms near exterior walls, but the vent runs were short and often terminated directly through the stucco with minimal slope or support. Six or seven decades later, those runs are crusted with lint, sagging at the seams, and in some cases no longer connected to anything at the wall.
North of Ventura, especially in the hillside tracts and gated communities along Hayvenhurst and Balboa, you’ll find 1980s and 1990s Mediterranean-style rebuilds. These are the homes where the 1994 Northridge earthquake shook chimneys and vent chase walls hard enough to crack internal ductwork that was then patched over during cosmetic repairs. We’ve worked on Encino homes where the dryer vent looked clean from the firebox side and turned out to be completely separated inside the wall, dumping lint into the framing cavity for years. That’s what a camera inspection exposes.
This is not a heavy wood-burning market. Encino’s chimneys see a few fires per year, not nightly use. The creosote risk is lower than a mountain town. But the structural and mechanical risks are higher because of seismic history and aging materials. Dryer vents run through the same walls and chases as those chimneys in many older Encino homes. When one shifts, the other often follows.
Earthquake Damage and Your Dryer Vent: What We Actually Find
The 1994 Northridge earthquake was a 6.7 magnitude event centered about 10 miles from Encino. The damage to residential chimneys and vent chases was enormous, and not all of it was repaired properly. Unpermitted rebuilds were common in the years after. Technicians who work in this area regularly find mismatched flue tiles and unsealed crowns that only show up when you run a camera down a flue that looks perfectly clean from the firebox. That hidden damage extends to dryer vent runs, where disconnected or crushed ductwork behind stucco is common in 1980s and 1990s rebuilds.
Here’s what that means for Encino homeowners in practical terms: you can clean a dryer vent every year and still have a fire hazard if the duct is separated inside a wall cavity. Lint stops at the separation point and accumulates where it’s hottest and most confined. The cleaning job looks successful because airflow seems acceptable, but the camera tells a different story. We show you that story. If there’s a crack, a separation, or a crush point, you’ll see it on the screen before we discuss repair options.
We were called to a 1950s ranch off Ventura Blvd in Encino (91316) after the homeowner noticed lint blowing back into the laundry room. Using a camera, we found the original clay flue tile had cracked from earthquake settling and was pulling dryer exhaust into the wall cavity instead of outside. We replaced the damaged section with a new DuraFlex liner and sealed the crown, restoring proper venting. That’s not an exotic scenario in this part of the Valley. It’s a Tuesday.
Serving Encino, CA — Our Local Coverage Area
We’re based in the Encino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Encino
In most Encino homes, extended drying time points to reduced airflow caused by lint buildup, a crushed duct section, or a disconnected joint inside the wall, especially in homes that experienced shifting during the 1994 Northridge earthquake. Lint accumulates fastest at the first restriction point, and from there the airflow degrades quickly. We run a camera first to find the restriction, then clean or repair the run so your dryer finishes cycles on the first pass. Call (855) 382-6159 to schedule an inspection.
Every 12 months for a two-person household, and every 6 to 9 months for larger families or anyone who runs the dryer daily. Encino’s dry climate produces brittle, quick-igniting lint, so the fire risk from accumulated lint is higher than in humid coastal areas. If you have a long run through a hillside chase or a roof termination, lean toward the shorter interval. We’ll give you a realistic schedule after the first camera inspection.
Yes. The Northridge earthquake shifted framing and cracked masonry in thousands of Encino homes, and many vent chases were patched over without inspecting the ductwork inside. Shifts of even an inch are enough to separate a duct joint or crush flexible pipe behind stucco. If your home saw earthquake repairs in the 1990s and the dryer vent has never been camera-inspected, it’s worth checking before the next heavy laundry season. You’ll see exactly what’s in there, and we’ll only recommend repair if the camera justifies it.
Lint blowing back into the laundry room, a burning smell during cycles, a dryer that’s hot to the touch on top, or an exterior damper that never opens during operation. Any of these means the vent is not exhausting properly and lint is building somewhere it shouldn’t. In Encino, where vent runs are often hidden behind stucco and drywall, these are the warning signs that prompt the camera work that finds the real problem. Call (855) 382-6159 and we’ll get it diagnosed.
Every time. We run a camera through the full vent run before cleaning to document the condition and find hidden defects, and again after cleaning to verify the result. You see the footage. If we recommend a repair, it’s because the camera showed a disconnected joint, crushed section, or unsealed connection, not because we’re guessing. Nothing is recommended without evidence you can see for yourself.
Contact Corona Chimney Sweep for Dryer Vent Cleaning in Encino
If your dryer vent hasn’t been inspected in the last year, or you’re noticing longer drying times or lint blowback, call us at (855) 382-6159 for a free estimate. We serve all Encino zip codes: 91316, 91416, 91426, and 91436. Nolan Ferris and our technicians handle the inspection, the cleaning, and the repair if the camera finds something. One provider, every venting hazard, no handoffs.
Written by Nolan Ferris, Owner at Corona Chimney Sweep, serving Encino and the San Fernando Valley.