Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Century City, CA
Chimney repair in Century City means working around high-rise HOA rules, mechanical venting systems, and a small pocket of 1960s ranch homes where the original masonry work is now sixty years old. Corona Chimney Sweep handles the full scope: flue liner replacement, crown repair, damper work, flashing, and caps. We repair what we find, on the same visit. If your condo board is asking questions about a shared stack or your own fireplace isn’t drawing right, call (855) 382-6159 for a straight answer.
Why Century City Homes Are Different
Century City doesn’t have block after block of detached houses with traditional masonry chimneys. Most residential calls come from high-rise towers like Alphaville and Century Woods, where fireplaces are factory-built or gas-only and vent through shared or mechanical flues. That changes the whole job. A gas fireplace in a sealed combustion system rarely needs a traditional sweep, but it does need valve and burner service, vent inspection, and sometimes coordination with the building’s maintenance staff. HOA approvals matter here more than almost anywhere else in Los Angeles County.
West of Avenue of the Stars, there are a handful of 1950s and 60s ranch homes on hillside streets like Club View Drive. Those houses have real masonry chimneys, and the mild, dry Mediterranean climate means fireplaces sit unused for months. When Santa Ana winds kick up in the dry season, any creosote left from the last burn becomes a genuine ignition risk. Coastal fog and the marine layer add another wrinkle: unused flues absorb moisture, and that moisture degrades mortar joints and crown material faster than people expect. The work here is seasonal and specific, not routine.
Styles & brands we work with
Our Main Century City Services
Two services account for most of the calls we take from Century City: fireplace and vent maintenance in condo towers, and dryer vent fire prevention in high-rise laundry rooms. Both share the same root issue: flues and vents get ignored until they stop working or start smoldering.
Chimney Sweep in Century City
A chimney sweep here is not a one-size-fits-all job. Gas units in towers need vent inspection and burner service, while the wood-burning fireplace in a 1960s ranch home needs full creosote removal from the firebox to the flue cap. We schedule around HOA access rules, bring the right equipment for tight roof access, and document what we find. Read more about the Chimney Sweep in Century City process.
Dryer Vent Cleaning in Century City
Clogged dryer vents cause residential structure fires every year, and high-rise buildings concentrate that risk. Lint accumulates in the duct run, restricts airflow, and creates the conditions for combustion. We clean dryer vents with the same combustion-venting discipline we bring to chimney work: inspection, cleaning, and airflow verification. Learn what it involves on the Dryer Vent Cleaning in Century City page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Century City
Chimney repair in Century City splits into two distinct types of work. In the 1960s ranch homes west of Avenue of the Stars, we rebuild mortar crowns, replace rusted flashing, and install new flue liners where the original terracotta has cracked. In the high-rise towers, repair usually means damper and cap service on shared stacks, vent connector repair on gas units, and HOA-facing documentation of what was found and what was fixed. The dry season makes repair urgent: a damaged flue used during a Santa Ana event is a house fire waiting to start. Corona Chimney Sweep has served Century City since 2018, and we repair what we find on the same visit. For more on our repair capabilities, see Chimney Repair.
Chimney Cap Installation
Signs you need it
Water staining on the firebox floor, rust on the damper hinges, or a missing cap after a wind event.
What it costs in Century City
Chimney cap installation in Century City typically runs $300 – $650 depending on flue diameter, roof access, and whether the cap is stainless or galvanized.
How we do it
We measure the flue opening, specify a cap that blocks rain and animal entry without restricting draft, and mechanically fasten it to the crown so it survives Santa Ana gusts.
Chimney Cap Replacement
Signs you need it
A cap that is rusted through, bent from falling debris, or missing its mesh spark arrestor.
What it costs in Century City
Replacements in Century City usually fall between $350 – $700, with tower rooftop access sometimes adding labor time.
How we do it
We remove the failed cap, check the flue for water damage from the exposure, and install a properly sized replacement that restores the spark arrestor and rain protection.
Chimney Liner Installation
Signs you need it
Flaking terracotta at the firebox, visible gaps between flue tile joints during inspection, or a liner that fails a camera check.
What it costs in Century City
Chimney liner installation in Century City typically ranges from $4,500 – $7,500 depending on height, flue configuration, and liner material.
How we do it
We specify a DuraFlex stainless flexible liner where an older or offset flue prohibits rigid sections, insulate it where code requires, and verify draft before we leave.
Chimney Flashing Repair
Signs you need it
Water staining on ceilings near the chase, peeling paint around the chimney penetration, or visible gaps in the flashing at the roofline.
What it costs in Century City
Flashing repair in Century City usually runs $400 – $1,100 depending on roof pitch, access from the rooftop or ladder, and the condition of the surrounding shingles.
How we do it
We strip the failed flashing, inspect the penetration for rot or gaps, install new step flashing sealed with a polyurethane-compatible sealant, and test with water where practical.
Chimney Crown Repair
Signs you need it
Visible cracks in the mortar crown, spalling concrete at the top of the chimney, or moisture inside the flue during dry weather.
What it costs in Century City
Crown repair in Century City typically runs $850 – $1,700 when the crown can be resurfaced, and more when full replacement is required.
How we do it
We grind the damaged surface, apply a proper crown repair compound with a slight slope away from the flue, and install a drip edge if the existing crown lacks one.
What Chimney Repair Costs in Century City
| Item | Typical range in Century City |
|---|---|
| Chimney cap installation | $300 – $650 |
| Chimney cap replacement | $350 – $700 |
| Chimney liner installation | $4,500 – $7,500 |
Do I really need a new liner if the old one passes a visual check?
A visual check misses most liner damage. Flue tile cracks, mortar joint erosion, and hidden gaps only show up on a camera inspection. If the camera shows intact tile and joints, no liner work is required. If it shows gaps, the liner is no longer protecting the structure from heat transfer.
Can you repair a chimney without HOA approval in Century City?
Not usually, and we don’t try to bypass boards. For tower units, we provide a written scope of work, material list, and access requirements the building manager can take to the board. On the ranch homes west of Avenue of the Stars, no HOA is involved and repairs begin once you approve the estimate.
Brands We Service in Century City
We source materials from contractor-grade lines you will not find in a big-box aisle: DuraFlex for flexible stainless liners, HeatShield for flue resurfacing where full replacement is not needed, and Gelco and Olympia Chimney for caps and termination hardware. Common Century City parts are stocked locally, and special-order items are usually on site within a few days. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Century City, CA
| Service | Typical range in Century City |
|---|---|
| Chimney cap installation | $300 – $650 |
| Chimney cap replacement | $350 – $700 |
| Chimney liner installation | $4,500 – $7,500 |
| Chimney flashing repair | $400 – $1,100 |
| Chimney crown repair | $850 – $1,700 |
| Chimney sweep (gas or wood) | $189 – $340 |
| Dryer vent cleaning | $129 – $229 |
Two things push price up in Century City: rooftop access in high-rise towers, which often requires HOA-coordinated roof rights and sometimes a site-specific safety plan, and the age of the original 1960s masonry on Club View Drive and nearby streets, where decades of deferred maintenance mean more initial work. Every quote is fixed before we start. There is no surprise add-on at the end.
Neighborhoods We Serve in Century City
We work throughout the 90067 ZIP code and the few residential streets immediately adjacent. Century City is compact, which means response time is typically a day or two for standard calls, though HOA scheduling can add a few days in the towers.
- Century Woods
- Alphaville
- Club View Drive area
- Avenue of the Stars corridor
- Rancho Park adjacent
Service Area – Cities Near Century City
Beyond Century City, we provide the same chimney repair and venting services in Beverly Hills, CA, Culver City, CA, West Hollywood, CA, and Santa Monica, CA. Each has its own housing stock and access rules, but the process stays consistent: inspect, quote, fix.
Serving Century City, CA — Our Local Coverage Area
We’re based in the Century City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Century City
Usually within a day or two for a standard call. Tower work adds a scheduling layer: we need roof access approval from the building manager or HOA, and in some buildings, a certificate of insurance filed with the management office before we set foot in the building. That paperwork typically takes two to three business days.
Yes. We provide a written scope of work, the specific materials we will use, and a summary of the safety issue the board can review. If the board has questions, we answer them directly. We are used to board-level coordination in Century City towers.
We tell you that on the inspection. A purely decorative gas fireplace with a sealed vent does not need a traditional sweep, and we will not sell you one. What it may need is a burner and valve check, vent obstruction inspection, or cap service so it remains safe if you ever do light it.
Call (855) 382-6159 for a free estimate on any chimney or vent work in Century City. If there is a repair to find, we find it. If there is not, we tell you that too.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Century City Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Veronica Flores"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Jodi Brooks"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Marcy Padgett