Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Compton
A chimney sweep in Compton runs $189 – $320 for a standard open-hearth fireplace, with Level 2 camera inspections adding $129 – $249 depending on flue height and access. Most of the work we get called for in Compton isn’t routine sweeping, it’s ungloving flues that haven’t been opened in decades. We’re on the 91 and 710 weekly, and we know the tract layout off Compton Boulevard, Alondra, and Rosecrans well enough to quote accurately over the phone. If you’re in 90220, 90221, 90222, or 90223 and want a straight answer about what’s actually inside your chimney, call (855) 382-6159. We’ll tell you what a camera shows, not what a script says.
Why Corona Chimney Sweep Is Compton’s Preferred Chimney Sweep Company
Compton homeowners call us because we repair what we find. That’s the whole model. Nolan Ferris built the company around a simple rule: if our tech spots a cracked flue tile, a failed mortar crown, or a rusted damper, we fix it. No referral slip, no third subcontractor, no three-week wait while you coordinate between a sweep crew and a mason who doesn’t answer the phone. One provider, every venting hazard.
The housing stock in Compton tells a specific story. Most homes off Willowbrook, Long Beach Boulevard, and the streets between Compton High and the Gateway Towne Center were built between 1920 and 1965. Original masonry fireplaces. Clay-tile flues. Fifty, sixty, seventy years of heat cycling and zero flue inspections for long stretches. When a homeowner finally books a sweep, what we find is usually worse than what they expected. The advantage of hiring Chimney Sweep technicians who are also trained in flue repair is this: you get one diagnosis, one price, one crew, and a camera report you can actually watch.
Styles & brands we work with
Chimney Services in Compton
Chimney Services in Compton means something different than it does in newer cities like Irvine or Chino Hills. Here, the job often starts with figuring out whether the flue was ever designed to vent what’s currently attached to it. A 1950s fireplace built for wood burning, now venting a gas log set or a converted furnace flue, is the single most common condition we document in 90221 and 90222. We run a camera, measure the flue dimensions, check the smoke chamber, inspect the crown and flashing, and then give you a written report with still images. Nothing gets recommended on speculation.
Level 1 and Level 2 Inspections
A Level 1 inspection is what most Compton homeowners book when they’ve just bought a house or haven’t used the fireplace in years. It covers the readily accessible portions: firebox, damper, smoke chamber, and flue as far as we can see. A Level 2 inspection in Compton typically runs $129 – $249 and includes full camera scanning of the flue interior. We recommend Level 2 whenever a property changes hands, after a chimney fire, or when a flue has been sealed and you’re not sure what’s behind the cap.
Annual Sweep and Creosote Removal
Customers who actually burn wood in Compton should have their flues swept once a year, ideally in September or early October before the first consistent fires of the season. The mild, dry climate here does something specific to creosote: it bakes it. Long dry summers harden creosote into a glaze that wire brushes alone won’t remove. We carry chemical treatment solutions and rotary whip systems that break down glazed third-degree creosote before we sweep the flue. Plan on $220 – $320 for a full creosote removal when glazing is present.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Sweep Certified in Compton
Chimney Sweep Certified work in Compton starts with the reality that many of these fireplaces haven’t been professionally serviced since the homeowners’ parents owned the house. We arrive with camera equipment, drop cloths, a HEPA vacuum, and the same professional-grade materials a contractor would buy at a supply house: DuraFlex liner components, HeatShield resurfacing material, and Gelco sealants where crown repair is called for. Every sweep includes a visual inspection of the cap, crown, flashing, and damper assembly. You get a written condition report regardless of whether we find anything beyond normal soot.
Fireplace Cleaning and Soot Removal
A standard open-hearth fireplace cleaning in Compton runs $189 – $260 and covers the firebox, damper, smoke shelf, and the first 15 – 20 feet of flue. Soot removal in gas fireplaces is lighter work, typically $150 – $200, and usually comes with an inspection of the gas log set and venting path. What we won’t do is brush a flue that a camera hasn’t first confirmed is structurally sound. You’d be surprised how many Compton flues have hidden cracks behind what looks like normal soot.
Creosote Removal for Wood-Burning Systems
For active wood burners in Compton, creosote is the thing that actually starts chimney fires. First-degree creosote is flaky and brushes out. Third-degree creosote is a hard, shiny tar glaze that can ignite at 2,000°F and is common in flues that ran hot for years without a sweep. We use mechanical rotary tools and, where needed, chemical treatment to break the glaze down before removal. This is not work you want done by someone who just “sweeps chimneys” on the side. If the creosote is stage three, expect the job to take longer and cost more, $275 – $350 depending on how far up the flue the glaze extends.
Common Chimney Sweep Problems We See in Compton Homes
- Sealed or capped flues with unknown conditions behind them. The previous owner capped the chimney, nobody knows why, and now a gas appliance is venting into a flue that hasn’t been inspected since the Reagan administration. We camera it before anything else.
- Third-degree creosote glazing from years of hot fires and dry air. Compton’s long dry season bakes creosote into a hard glaze. Brushing alone won’t touch it. We chemically treat, then mechanically remove.
- Clay-tile flues cracked from heat cycling and seismic settling. Original 1940s – 1960s clay tiles crack over time. The gaps let heat and gas reach the framing around the chimney. HeatShield resurfacing can restore the flue interior without a full rebuild in many cases.
- Cracked mortar crowns that go unnoticed until first winter rain. Compton gets about 12 – 15 inches of rain, nearly all between November and March. The first good rain exposes crown cracks that sat invisible all summer. We seal crowns with Gelco sealant before the wet season starts.
Pricing for Chimney Sweep in Compton, CA
A chimney sweep in Compton costs between $189 and $320 for a standard masonry fireplace. Gas fireplace cleaning runs $150 – $200. Creosote removal with chemical treatment runs $275 – $350 when glazing is present. Level 2 camera inspections add $129 – $249 depending on whether the flue is one story or two, and whether it’s straight or offset. If you need a crown reseal, budget $350 – $600. A HeatShield liner resurfacing job in Compton typically runs $1,800 – $3,200 depending on flue length and diameter, which is less than a full stainless liner replacement in most cases. We give you a flat price before the work begins, always after the camera inspection, never before we’ve seen the inside of the flue. Call (855) 382-6159 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterTrusted Brands We Service in Compton
We stock local parts for Compton customers and install materials from DuraFlex, HeatShield, and Gelco. These are the same product lines professional chimney contractors source, not big-box substitutes. DuraFlex stainless flexible liners are what we install when an older Compton flue needs a code-compliant venting path, especially in retrofits where rigid systems can’t make the turns through a mid-century chimney chase. HeatShield resurfacing is our go-to for deteriorated clay-tile flues with hairline cracking, the kind of repair that used to mean a full rebuild. Gelco sealants handle crown and flashing work. When we recommend a liner or a resurfacing job, we show you the camera footage that proves it. If the camera doesn’t show damage, we don’t recommend the repair. That’s the whole point.
Here’s the thing about Compton specifically. The real work in this city isn’t routine sweeping of active fireplaces. It’s ungloving long-neglected flues. The housing stock does the explaining: 1920s through 1960s tract homes whose original fireplaces were built for ambiance, not efficiency. Many have been sealed with concrete or capped with plywood by a previous owner who didn’t want to deal with the chimney. Others sat tenant-occupied for years with no inspection at all. We’ll run a camera and tell you plainly whether the flue’s condition supports reopening the fireplace or whether it should stay sealed.
On a 1950s stucco bungalow off Compton Boulevard, our tech found the chimney flue capped with concrete and sealed with plywood, no fire had burned in years. We ran a camera and discovered third-degree creosote glazed on the smoke chamber walls, which we removed with a chemical sweep before recommending a HeatShield liner for the gas appliance vented into the original clay-tile flue. That’s the kind of problem that doesn’t show up on a standard sweep checklist.
A call that starts as “I need a chimney sweep” in Compton often ends up as one of three things: a decommissioning verification, a gas-appliance venting check, or a full flue camera inspection with findings nobody expected. The single most important thing you’ll get from us is evidence. If we say your flue liner is shot, you’ll see the cracks on camera before we ever quote a repair. If we say the flue is fine and just needs a sweep, that’s what we’ll do. No invented emergencies.
We Also Serve Cities Near Compton
Our crews cover Compton and the surrounding communities including East Rancho Dominguez, West Rancho Dominguez, Carson, and Gardena. If you’re on the border of Compton and any of these cities, call us and we’ll confirm coverage for your address.
Serving Compton, CA — Our Local Coverage Area
We’re based in the Compton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Compton
You need a camera inspection more than a sweep. If the flue is sealed and no appliance vents through it, a sweep is pointless until you know what’s behind the cap. We charge $129 – $249 for a Level 2 camera inspection that will tell you whether the flue is sound, what the cap is actually masking, and whether reopening is safe or whether the chimney should stay decommissioned. Call (855) 382-6159 and we can schedule that for you this week.
Wood-burning fireplaces need a sweep and Level 1 inspection once a year. Gas appliances vented into a masonry flue should be inspected every two to three years. If you’ve never had a camera inspection and the house was built before 1970, book one now. After that first full look, most Compton homeowners are fine on an annual or biennial schedule. We’ll tell you what your specific house needs after the first visit.
A sweep removes soot and creosote from the flue. A Level 2 inspection uses a camera to document the flue’s structural condition. In Compton, where many flues are 50 to 100 years old, we recommend the Level 2 whenever the property changes hands, after a chimney fire, or when a flue has been sealed and you need to know what’s behind the cap. The inspection doesn’t clean anything; it’s diagnostic. We do both in the same visit when you want them combined.
Yes. Third-degree creosote is a hard, shiny glaze that brushes alone won’t remove. We apply a chemical treatment to break the tar down, then remove it with rotary equipment. This is common in Compton flues that ran hot for years without service and then sat through multiple long dry seasons. Expect to pay $275 – $350 for chemical creosote removal. We won’t sweep a glazed flue with brushes only, because that makes the problem worse. Call (855) 382-6159 and we’ll camera it before touching anything.
Always ask for the camera footage. If they can show you cracked clay tiles, gaps between tile sections, or damage that’s allowing heat and gas to reach the framing around the chimney, the recommendation is legitimate. If they can’t, walk away. In Compton, where many original flues date to the 1940s and 1950s, liner problems are real and common. We recommend HeatShield resurfacing before full liner replacement when the damage is limited to hairline cracks and deteriorated mortar joints. That runs $1,800 – $3,200, often half the cost of a full stainless liner. But we never recommend it without camera evidence you can see yourself.
Call Corona Chimney Sweep for Chimney Service in Compton
If you live in Compton and you’ve been putting off the chimney, stop. The flue doesn’t heal itself. The creosote doesn’t evaporate. The cracked mortar crown doesn’t reseal. Call (855) 382-6159 and tell us what you’ve got: wood fireplace, gas insert, furnace flue, sealed cap, cracked bricks, whatever. We’ll give you an honest read over the phone, a flat price after the camera inspection, and a written report you keep either way. We sweep, we repair, we do dryer vents, and we don’t pass off problems to someone else.
Written by Nolan Ferris, Owner at Corona Chimney Sweep, serving Compton since day one.