Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Fontana, CA
Chimney repair in Fontana usually means dealing with an aging prefab fireplace and metal flue that’s hit the end of its service life, not a hand-built masonry stack. The older tracts across 92335 and 92336 are full of factory-built fireboxes from the 1970s and 80s, and those systems get condemned rather than patched when the liner or firebox fails. We see it every week during fall inspection season. Call (855) 382-6159 if you’re looking at a chimney that hasn’t been touched in years, and we’ll tell you straight whether it’s repairable or needs a liner replacement.
Why Fontana Homes Are Different
Fontana’s housing stock works against the typical chimney repair playbook. Most of the city was built in successive waves of tract development: large single-family subdivisions from the 1960s through the 1980s, then another major push in the 1990s and 2000s. The 92335, 92336, and 92337 ZIP codes are dominated by volume-built homes with prefab factory fireplaces and metal chimneys, not masonry fireboxes. That’s a critical distinction because those factory-built systems age differently than a traditional brick chase. The original metal flue liner in a 1972 Fontana tract home is thinner than what gets installed today, and the firebox refractory panels crack under repeated heat cycling.
Fontana’s climate compounds the problem. Summers stay hot and dry, with Santa Ana wind events hitting in fall. Chimneys sit unused for months, then see a compressed burn season from Thanksgiving through January. That heat exposure bakes the rain cap and chase top, and the dry months give pests a quiet flue to nest in. What we typically find in Fontana is not creosote buildup by itself, it’s a combination of sun-degraded caps, bird or rodent nesting from the off-season, and a prefab system that’s cracked or rusting at the seams. A sweep in Fontana is really a pre-season inspection of the entire factory-built assembly.
Styles & brands we work with
Our Main Fontana Services
Two services account for most of what Fontana homeowners call us about: chimney sweeping and dryer vent cleaning. Both are fire-prevention work, and both need to happen on a schedule tied to Fontana’s short winter burn season.
Chimney Sweep in Fontana
A Fontana chimney sweep typically involves pulling the cap, brushing the metal flue, vacuuming the firebox and smoke shelf, and inspecting the entire factory-built assembly for cracked refractory panels or a compromised liner. Given the number of 1960s and 70s era prefab systems still in service across 92335, we often find that the sweep is the first time anyone has looked inside the chimney in a decade. The fall months fill up in Fontana because homeowners want the fireplace ready for the short winter burn window. See Chimney Sweep in Fontana for the full breakdown of what we do and what it costs.
Dryer Vent Cleaning in Fontana
A clogged dryer vent is a fire waiting to happen, and Fontana’s dry climate means lint dries out fast and becomes tinder. Many Fontana homes have laundry rooms on interior walls with long vent runs through the attic or out the roof, which collect lint faster than short exterior-wall runs. The same technicians who handle combustion venting clean dryer vents, so the inspection looks for poor connections, crushed flex pipe, and any blockage that’s been there since the home was built. See Dryer Vent Cleaning in Fontana for scope and pricing details.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Fontana
Chimney repair in Fontana is a different job than in older Inland Empire cities because most of what we open up is a factory-built system, not a masonry fireplace. In the 1960s and 70s tracts across 92335, we regularly find the original prefab fireplace and flue at the end of its service life. The firebox refractory panels crack, the metal liner rusts through, and the whole assembly has to be evaluated for replacement rather than repair. A 1974 Fontana tract home with a prefab fireplace that’s never been touched is almost always a candidate for a new liner or a full system condemnation. Vented gas logs converted into an old prefab firebox don’t solve the problem either; the firebox still has to be sound. We repair what we find, and in Fontana what we find is consistent enough that we stock the materials to handle it without a second trip. For the full scope of our repair work, see Chimney Repair.
Chimney Cap Installation
Signs you need it
Your existing cap is missing, rusted through, or knocked loose by a Fontana Santa Ana wind event and birds or rodents are getting into the flue.
What it costs in Fontana
Chimney cap installation in Fontana typically runs $220 to $480 depending on the flue size and whether the chase top needs any prep work first.
How we do it
We measure the flue opening, mount the cap to the existing chase or flue tile, and check that the draft isn’t restricted once it’s in place.
Chimney Cap Replacement
Signs you need it
Your cap has rust holes, the mesh screen is torn, or you see water staining around the chase top after a Fontana rain.
What it costs in Fontana
Chimney cap replacement in Fontana runs $200 to $450, with the final price depending on the existing chase condition and the cap type required.
How we do it
We remove the old cap, check the flue opening for damage from the failed cap, and install a new one sized for the factory-built system.
Chimney Flashing Repair
Signs you need it
You’ve got water staining on the ceiling near the chimney or visible gaps where the flashing meets the chase in a Fontana wind-driven rain.
What it costs in Fontana
Chimney flashing repair in Fontana generally costs $350 to $800 depending on how much of the existing flashing has to be removed and redone.
How we do it
We strip the old flashing, rebuild the transition between the chase and the roof line, and seal it so wind-driven rain from the Cajon Pass can’t get in.
Chimney Crown Repair
Signs you need it
The concrete crown or chase top around your flue is cracked, spalling, or missing chunks after years of Fontana sun exposure.
What it costs in Fontana
Chimney crown repair in Fontana runs $450 to $950, depending on the extent of the cracking and whether the crown needs a full rebuild.
How we do it
We evaluate the crown condition, fill and seal hairline cracks, or tear out and re-form the crown if it’s too far gone to patch.
What Chimney Repair Costs in Fontana
| Item | Typical range in Fontana |
|---|---|
| Chimney cap installation | $220 – $480 |
| Chimney cap replacement | $200 – $450 |
| Chimney flashing repair | $350 – $800 |
| Chimney crown repair | $450 – $950 |
These are the prices for the repairs we do most often in Fontana. Liner replacement and full firebox rebuilds are quoted on inspection because the scope depends on what’s behind the chase and what the original builder installed. We don’t quote those blind over the phone, and we won’t recommend a liner or a rebuild without showing you the camera footage.
Can you repair a prefab fireplace, or does it have to be replaced?
The answer depends on the firebox condition. If the refractory panels are cracked or the metal liner has rusted through, the factory-built system is usually condemned and replaced rather than patched. We’ll show you the damage before any recommendation is made.
Do I really need a new liner if the fireplace still works?
Sometimes yes, sometimes no. A working fireplace doesn’t mean the liner is intact. If the metal flue has holes or separation, the chimney is venting into the chase, not outside. We only recommend a new liner when the camera shows that it’s actually needed, and you’ll see that footage yourself.
Brands We Service in Fontana
We install and service materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. The DuraFlex stainless flexible liner system handles the older and often convoluted chimney configurations common in Fontana’s tract housing, and HeatShield resurfacing restores deteriorated flue interiors without a full liner replacement where conditions qualify. We keep common parts stocked for the prefab systems we see most in Fontana, which means less waiting on a second trip. See our brands for the full material list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Fontana, CA
| Service | Typical range in Fontana |
|---|---|
| Chimney sweep | $200 – $450 |
| Chimney inspection | $100 – $300 |
| Chimney cap installation | $220 – $480 |
| Chimney cap replacement | $200 – $450 |
| Chimney flashing repair | $350 – $800 |
| Chimney crown repair | $450 – $950 |
| Dryer vent cleaning | $150 – $300 |
What pushes a Fontana job higher is usually access and condition. Steep roof pitches on two-story tract homes, chases in a corner that’s hard to ladder, or a cap welded in place by decades of heat and rust all add time. The quote you get upfront for a sweep or cap job is the price you pay unless we find something that changes the scope, and we’ll tell you before doing anything that isn’t in the agreed work.
Neighborhoods We Serve in Fontana
We cover all of Fontana’s ZIP codes: 92335, 92336, 92337, and 92331. The densest concentration of our chimney work comes from the older tracts around Southridge and the 1960s and 70s subdivisions near downtown, where the original prefab systems are hitting their limits. Newer homes in the 1990s and 2000s tracts still need sweeps and dryer vent cleaning on a regular schedule, even if the chimney hasn’t failed yet.
- Southridge
- Downtown Fontana
- West End
- Sierra Lakes
- North Fontana
We schedule Fontana work in morning and afternoon blocks, and most neighborhoods fall within the same day or next-day response window when we’re not in the fall rush. Book early in September if you want a pre-season inspection before the burn window hits.
Service Area – Cities Near Fontana
Corona Chimney Sweep has served Fontana since 2018, and covers the surrounding Inland Empire communities where the housing stock is similar. If you’re in Bloomington, CA, Rialto, CA, Glen Avon, CA, or Pedley, CA, we work there regularly and know the tract-home chimney patterns those areas share with Fontana. Call for scheduling in any of these cities; the inspection process is the same and the materials come off the same truck.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Fontana
Most Fontana appointments are scheduled within a few days, and during the fall rush we add extra blocks to keep the wait short. If you’re calling in September before the burn season, you’ll typically get a slot inside a week. Emergency repair calls get prioritized where a failed liner or cap is actively causing damage.
Some Fontana HOAs require architectural review for visible changes like a new cap or chase top, especially in the newer 1990s and 2000s subdivisions. Interior liner work and sweeps almost never need approval. We’ll tell you what’s visible from the street and what’s not so you can check your HOA rules before we schedule.
Yes. Many Fontana homes have converted wood-burning prefab fireplaces to gas logs or direct-vent gas inserts. The flue still needs inspection and cleaning, and the firebox condition matters just as much as it does for wood. We inspect gas venting to make sure combustion byproducts are actually leaving the house, not collecting in the firebox or chase.
If you’re in Fontana and need a chimney swept, a prefab system inspected, or a failed liner addressed, call (855) 382-6159 for a free estimate. We’ll give you an honest read on what needs doing and what can wait, and we’ll show you the evidence before recommending any repair.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fontana Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Daniela Martinez"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Imani Dawson"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Veronica Flores