Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Glendale, CA
Chimney repair in Glendale starts with knowing what you’re actually looking at. Most homes here were built before 1960, which means original brick or stucco-clad masonry chimneys that have survived the 1971 San Fernando quake, the 1994 Northridge quake, and decades of Santa Ana winds. We’re Corona Chimney Sweep, and we’ve served Glendale since 2018 as a full-service chimney company: cleaning, structural repair, and dryer vent fire-hazard removal. When we find a cracked flue tile, a failed crown, or a loose brick course, we repair it in house. Call (855) 382-6159 for a free estimate.
Why Glendale Homes Are Different
Glendale’s chimney stock runs older and more structurally varied than most of Los Angeles County. The hillside neighborhoods of 91206, 91207, and 91208 hold 1920s and 1930s Spanish Colonial and Craftsman homes whose original fireplaces were often decorative or long abandoned, then retrofitted with gas inserts or wood stoves after the 1980s. That creates a particular pattern: the firebox gets a modern appliance while the original flue stays untouched, sometimes unlined, sometimes lined with clay tiles that were never meant to vent a gas appliance. We see it constantly.
Geography matters too. Homes in the Verdugo foothills catch the brunt of Santa Ana wind events: down-drafting pushes soot back into living rooms, dry brush and small limbs end up in flues, and fine dust drifts through uncapped chimneys. Winter rains swell stucco and loosen mortar. A chimney that passes a visual check in July can show water intrusion by February. That’s why annual inspections catch water damage here as often as soot buildup.
One more thing: stucco-clad chimneys hide problems. A cracked crown or heat-damaged flue tile sits behind a layer of stucco that looks fine from the curb. By the time you see staining or spalling, the damage has been working for at least a season.
Styles & brands we work with
Our Main Glendale Services
Most Glendale homeowners call us about two things: chimney sweeping and dryer vent cleaning. Both are fire-prevention services, and both are handled by the same technicians, not separate crews.
Chimney Sweep in Glendale
Glendale chimney sweeping is less about heavy creosote than people assume. Because so many fireplaces here were decorative or converted to gas, the job is often about clearing decades of debris, bird or rodent nests, and quake-loosened masonry fragments before a gas appliance can be signed off. We clean to NFPA 211 standards, run a camera inspection, and document what we find in a photo report. One local condition worth knowing: after a Santa Ana, fine soot drifts deep into flues even on homes that rarely fire the fireplace. Full details on our Chimney Sweep in Glendale page.
Dryer Vent Cleaning in Glendale
A clogged dryer vent is a fire waiting to happen, and Glendale’s post-war apartment blocks near downtown see this more than the hillside homes do. Long vent runs, shared walls, and years of lint accumulation create real hazard in 91203, 91204, and 91205. We treat dryer vent cleaning as a fire-prevention service on equal footing with chimney work, using the same technicians trained in combustion venting. See our Dryer Vent Cleaning in Glendale page for specifics on the process and pricing.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Glendale
Chimney repair in Glendale usually starts with an earthquake we never felt personally. The 1994 Northridge quake loosened brick courses and cracked mortar joints in thousands of chimneys across the Verdugo foothills, and the damage didn’t always show up immediately. In the 91206 and 91208 hillsides, we routinely find 1930s chimneys with loosened bricks from both the 1971 San Fernando and 1994 Northridge quakes before any cleaning can proceed. The climate adds to it: hot, dry summers bake mortar, and winter rains work into every hairline crack. Our in-house repair team handles the full scope, using the same contractor-grade materials we install on new builds. No referrals, no handoffs. Learn more about our repair methods on our Chimney Repair page.
Chimney Cap Installation
Signs you need it
After a Santa Ana event, you’re finding soot blown back into the living room, or you’ve seen birds and small animals using the flue.
What it costs in Glendale
Chimney cap installation in Glendale typically runs $180 to $350 depending on flue size and roof access.
How we do it
We measure the flue opening, install a properly sized cap with a secure mechanical fastening, and verify the cap doesn’t restrict draft.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted through, warped from heat, or has come loose and sits cocked on the flue.
What it costs in Glendale
Chimney cap replacement in Glendale typically runs $200 to $400, including removal of the old cap and disposal.
How we do it
We remove the old cap, inspect the flue edge for damage, install the replacement, and photograph the finished work for your records.
Chimney Liner Installation
Signs you need it
A camera inspection shows cracked, spalling, or missing clay flue tiles, or the home has an unlined chimney venting a gas appliance.
What it costs in Glendale
Chimney liner installation in Glendale typically runs $1,800 to $4,500 depending on flue height, liner material, and whether a resurfacing alternative applies.
How we do it
We run a condition assessment, specify the correct liner system, and install a DuraFlex stainless flexible liner where the existing flue can’t be restored.
Chimney Flashing Repair
Signs you need it
You’re seeing water stains on the ceiling near the fireplace, or the flashing around the chimney base has pulled away from the roof or the masonry.
What it costs in Glendale
Chimney flashing repair in Glendale typically runs $300 to $750 depending on whether we repair the existing step flashing or replace it.
How we do it
We strip back the damaged flashing, replace or re-seat the step and counter-flashing, and seal the transition with a high-grade roofing sealant rated for Southern California sun.
Chimney Crown Repair
Signs you need it
The mortar crown shows visible cracks, is pitted, or has sections that have broken away and left the inner masonry exposed to rain.
What it costs in Glendale
Chimney crown repair in Glendale typically runs $400 to $1,000 depending on whether we resurface the existing crown or rebuild it entirely.
How we do it
We evaluate the crown’s condition, apply a properly sloped resurfacing material or rebuild the crown, and ensure water sheds away from the flue opening.
What Chimney Repair Costs in Glendale
| Item | Typical range in Glendale |
|---|---|
| Chimney cap installation | $180 – $350 |
| Chimney cap replacement | $200 – $400 |
| Chimney flashing repair | $300 – $750 |
Those are the most common repair jobs in Glendale. Liner work runs higher, $1,800 to $4,500, because it combines materials, scaffolding or roof access, and full inspection. HeatShield resurfacing can reduce the cost of some liner repairs when the flue qualifies.
How do I know if my chimney liner needs replacement in Glendale?
You won’t know from the ground. The only reliable way is a camera inspection of the flue interior. In older Glendale chimneys, clay tile damage from quake movement is common, and it’s invisible without a camera. We photograph everything and show you the images before recommending work.
Can earthquake damage to my Glendale chimney be repaired without rebuilding?
Yes, in most cases. Loose brick courses and cracked mortar can be re-pointed and stabilized. Where the flue interior has deteriorated, HeatShield resurfacing can restore it without a full liner replacement if conditions qualify. Rebuilding is only necessary when the structural core is compromised.
Brands We Service in Glendale
We install and service materials from six professional contractor brands, including HeatShield resurfacing systems, Gelco chimney caps, Olympia Chimney liners, and Famco dampers. These are the lines professional chimney contractors source, not big-box substitutes. We stock common replacement parts in our service vehicles so most cap and damper jobs wrap up the same day. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Glendale, CA
| Service | Typical range in Glendale |
|---|---|
| Chimney sweep | $180 – $300 |
| Dryer vent cleaning | $120 – $220 |
| Chimney cap installation | $180 – $350 |
| Chimney cap replacement | $200 – $400 |
| Chimney flashing repair | $300 – $750 |
| Chimney crown repair | $400 – $1,000 |
| Chimney liner installation | $1,800 – $4,500 |
Two factors push prices up in Glendale: hillside roof access and quake-damaged masonry that requires more prep work than expected. We quote a flat price before starting and don’t change it unless we find something structural that changes the scope, in which case we document it with photos and get your approval before proceeding.
Neighborhoods We Serve in Glendale
We work throughout Glendale, from the Verdugo foothills to the blocks near downtown. Our technicians know the difference between a 1920s Spanish Colonial chimney in the hills and a 1960s ranch flue near the 134, and that affects how we approach each job.
- Rossmoyne and Verdugo Woodlands (91207, 91208)
- Adams Hill and Moorpark (91205, 91202)
- Montrose and Sparr Heights (91208)
- Downtown Glendale and Citrus Grove (91203, 91206)
- Glenwood and Pelanconi (91201)
We schedule most Glendale jobs within 3 to 5 business days, with hillside neighborhoods sometimes adding a day depending on access.
Service Area – Cities Near Glendale
Beyond Glendale, we serve several neighboring cities.
We work regularly in Burbank, CA, La Cañada Flintridge, CA, Echo Park, CA, and Silver Lake, CA. The housing stock varies across these areas, and the mountain-foothill conditions change too. Whether it’s a hillside property near Glendale or a flatlander in Burbank, we apply the same camera-verified process and repair scope.
Serving Glendale, CA — Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Glendale
Most standard repairs like cap installation, flashing work, and crown resurfacing don’t require a permit. Full liner replacement or structural rebuild may, depending on Glendale’s current building code. We’ll tell you before we start how your specific job is classified, and we handle the permit process when one is required.
Most Glendale jobs are scheduled within 3 to 5 business days. After a Santa Ana or the first heavy rain, call volume spikes in the 91206 and 91208 hillside areas, so scheduling may extend slightly during those windows. Call (855) 382-6159 to lock in a date.
Yes. Many Glendale neighborhoods with 1920s and 1930s homes fall under HOA or preservation guidelines that restrict exterior changes like cap styles or flashing materials. We’ve worked with boards across the city and can provide the spec sheets and material documentation an HOA review usually asks for.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Glendale Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Raj Patel"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Megan Sullivan"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Laura Gallagher