Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Highgrove, CA
Chimney repair in Highgrove usually means dealing with the consequences of real firewood burning. Older masonry fireplaces, wood stoves, and manufactured chimney systems on ranch-style lots develop cracked flue tiles, failed mortar crowns, and deteriorated liners faster than the decorative gas-log fireplaces you see in newer subdivisions. Corona Chimney Sweep handles the repair work in-house, so what the camera finds during an inspection is what we fix. Call (855) 382-6159 to schedule.
Why Highgrove Homes Are Different
Highgrove sits in the Inland Empire’s citrus-and-horse-property belt, and the housing stock reflects that history. Most homes are mid-century to 1980s single-story ranch homes on generous lots, with scattered rural and custom properties mixed in. The chimneys here are a different animal from what you find across the county line in Riverside or Corona. You’re more likely to see a freestanding wood stove or a manufactured zero-clearance fireplace than a purely decorative gas insert.
That matters because cordwood burning produces real creosote, not the light soot that gas logs leave behind. The hot, dry summers and Santa Ana wind events in the fall create long stretches where debris, bird nests, and dry creosote accumulate inside flues. When winter finally arrives and fireplaces light up for the season, that’s when the problems surface. Highgrove’s larger lots also mean more homeowners store firewood on site and burn through more of it each winter than someone in a dense suburban neighborhood would. The result is heavier buildup and more stress on liners, crowns, and stove pipe. We see the difference on every inspection.
Styles & brands we work with
Our Main Highgrove Services
Most Highgrove homeowners call us for one of two reasons: a chimney that hasn’t been swept in years, or a dryer vent that’s become a fire hazard. Both are handled by the same technicians, trained in combustion venting.
Chimney Sweep in Highgrove
Chimney sweeping in Highgrove often means cleaning stove pipe and masonry flues that burn real cordwood. Glazed creosote is common here, especially on properties where oak or eucalyptus gets burned before it’s properly seasoned. We run rotary brushes and inspect the flue with a camera while we’re in there, so you get a sweep and a condition report in one visit. Chimney Sweep in Highgrove has the full scope.
Dryer Vent Cleaning in Highgrove
A clogged dryer vent is a fire waiting to happen, and Highgrove’s laundry rooms are no exception. Lint packs into the vent run over time, especially in older ranch homes where the dryer vent exits through the roof or a long exterior wall run. We clean the full length of the vent and confirm airflow before we leave. Dryer Vent Cleaning in Highgrove covers it in detail.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Highgrove
Chimney repair in Highgrove is what we do most, because a chimney that’s been burning cordwood for 30 or 40 years is usually hiding something. Hairline cracks in flue tiles, a mortar crown that’s spalling from years of direct sun and Santa Ana winds, or a flashing line that’s loosened on a comp roof. We inspect with a camera, show you the footage, and repair what we find. It’s why we stock HeatShield resurfacing materials and DuraFlex liner systems on the service trucks, not just brushes. Chimney Repair is a core service here, not a referral.
Chimney Cap Installation
Signs you need it
Rainwater stains on the ceiling near the chimney, bird noise in the flue, or a missing cap visible from the yard.
What it costs in Highgrove
Expect $180 to $450 for a standard stainless cap installed, depending on flue size and roof access on the property.
How we do it
We measure the flue, mount the cap with matching hardware, and seal the fasteners so wind doesn’t work them loose.
Chimney Cap Replacement
Signs you need it
A cap that’s rusted through, blown off during a Santa Ana event, or sized wrong for the flue from a previous install.
What it costs in Highgrove
Replacement runs $180 to $450, including removal of the old cap and cleanup of any debris it let in.
How we do it
We pull the old cap, check the flue opening for damage, and fit a new cap sized to the actual flue dimensions.
Chimney Liner Installation
Signs you need it
Cracked flue tiles on camera, gas appliance venting into an unlined clay flue, or a wood stove that drafts poorly and smokes the room.
What it costs in Highgrove
A DuraFlex stainless liner installation typically runs $2,900 to $5,600 here, depending on flue length and roof height.
How we do it
We size the liner to the appliance and flue, run it down the chimney, insulate where required, and terminate with a proper cap.
Chimney Flashing Repair
Signs you need it
Water stains on the ceiling or wall where the chimney passes through, or visible gaps where the roof meets the chimney.
What it costs in Highgrove
Figure $250 to $650 for resealing or replacing the flashing, more if the roof penetration is on a steep pitch.
How we do it
We remove the old flashing, inspect the underlayment, and install step flashing and counter-flashing sealed with a quality roof sealant.
Chimney Crown Repair
Signs you need it
Spalling concrete on the crown, cracks radiating from the flue, or standing water pooling on top of the chimney after rain.
What it costs in Highgrove
Crown repair or rebuild runs $450 to $1,100, depending on whether we patch and seal or form and pour a new crown.
How we do it
We chip out the loose material, build the crown form with the proper slope away from the flue, and pour a weather-resistant mix.
What Chimney Repair Costs in Highgrove
| Item | Typical range in Highgrove |
|---|---|
| Chimney cap installation | $180 – $450 |
| Chimney cap replacement | $180 – $450 |
| Chimney liner installation | $2,900 – $5,600 |
Do I really need a new liner, or can the old one be fixed?
Sometimes the existing liner can be salvaged. HeatShield resurfacing restores flues with hairline cracks or deteriorated mortar joints without a full liner replacement, where conditions qualify. We’ll show you the camera footage so you can make the call with evidence, not a sales pitch.
How often should a Highgrove chimney be swept and inspected?
If you burn cordwood here, annual sweeping is the minimum. The dry season and Santa Ana winds push debris into flues, and real firewood produces creosote that glazes quickly. An annual inspection catches crown cracks and liner damage before they become roof leaks or chimney fires. Call (855) 382-6159 to book.
Brands We Service in Highgrove
We install and service HeatShield, Gelco, Olympia Chimney, and Famco products. Parts are stocked on the trucks for most common Highgrove repairs, which keeps turnaround time short. Our brands page lists the full line.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Highgrove, CA
| Service | Typical range in Highgrove |
|---|---|
| Chimney sweep | $179 – $259 |
| Dryer vent cleaning | $119 – $199 |
| Chimney cap installation | $180 – $450 |
| Chimney cap replacement | $180 – $450 |
| Chimney liner installation | $2,900 – $5,600 |
| Chimney flashing repair | $250 – $650 |
| Chimney crown repair | $450 – $1,100 |
The biggest price drivers in Highgrove are roof pitch and flue length. Two-story homes and steep ranch roofs add setup time, and longer flue runs push liner material costs up. We give you a flat price before work starts, so the number on the quote is the number on the invoice.
Neighborhoods We Serve in Highgrove
We work throughout ZIP 92313, including the ranch properties east of La Cadena Drive, the horse-property lots along Center Street, and the newer infill homes near the Highgrove Marketplace area. Most calls here get a response within two business days.
- Highgrove Ranch properties
- Center Street corridor
- La Cadena Drive area
- East Highgrove parcels
Service Area – Cities Near Highgrove
We also cover the surrounding Inland Empire communities where the housing stock is similar. That includes Grand Terrace, CA, Colton, CA, Loma Linda, CA, and Rubidoux, CA. If you’re just outside Highgrove, call and we’ll confirm coverage.
Serving Highgrove, CA — Our Local Coverage Area
We’re based in the Highgrove area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Highgrove
Most Highgrove appointments are scheduled within two business days. If you have an active leak or a chimney fire threat, tell us when you call and we’ll prioritize the visit. Reach us at (855) 382-6159.
Most standard sweeps, cap replacements, and liner retrofits don’t need a permit. Full rebuilds or structural masonry work may require one, depending on scope. We’ll tell you before any work begins whether a permit applies to your job.
Yes. Highgrove’s mix of older masonry fireplaces, freestanding wood stoves, and manufactured chimney systems is exactly what we work on most. The same crew sweeps and repairs all of them, so there’s no handoff to another company when we find something wrong.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highgrove Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Daniela Martinez"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Imani Dawson"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Veronica Flores