Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Maywood, CA
Most chimney work in Maywood comes down to one thing: homes built before 1950 with original brick fireboxes, older damper assemblies, and flues that haven’t been touched in decades. Chimney repair here isn’t an occasional remodel line item. It’s the service that keeps a wood-burning fireplace safe in a city where residents burn wood regularly through winter cold snaps, often in fireplaces that were never relined. Corona Chimney Sweep has served Maywood since 2018, and we repair what we find. Call (855) 382-6159 when you need a chimney company that handles cleaning, structural repair, and dryer vent fire hazards without handing you off to someone else.
Why Maywood Homes Are Different
Maywood is a dense, roughly one-square-mile city where most homes are compact 1920s – 1950s stucco bungalows and small Spanish-style houses on narrow lots. The original fireplace in a Maywood home is typically a brick or masonry box with an older damper assembly, and a lot of them were built without a flue liner at all. That matters when you start burning wood in one. Masonry without a liner absorbs creosote into the mortar joints, and once creosote saturates brick, no brush-out removes it completely. The conversation shifts from cleaning to relining or resurfacing.
Maywood’s mild, dry climate also means fireplaces sit unused nine months out of the year. Birds and squirrels build nests in uncapped flues during that stretch. The first cold snap brings a fire, a smoke-filled living room, and a homeowner who discovers the flue has been blocked since spring. Santa Ana wind seasons add another layer: embers pulled from a chimney with creosote buildup or a failing spark arrestor become a roof-vent and neighbor-lot fire risk.
Then there’s the burn habit. A lot of Maywood residents burn scrap wood and pallets in winter. Pallet wood is often pine or composite, which produces thick, fast-building creosote. Scrap wood may have nails, glue, or paint residues that leave deposits on flue walls. A fireplace that burned clean with seasoned oak ten years ago may now have a half-inch of glaze inside. Sweeping turns into a code-clearance and relining conversation more often here than in cities with newer housing and gas-only fireplaces.
Styles & brands we work with
Our Main Maywood Services
Maywood homeowners call us most often for two jobs: chimney sweeping to clear creosote and animal nests before burning season, and dryer vent cleaning to remove the lint buildup that causes structure fires. Each service has its own Maywood page with full detail.
Chimney Sweep in Maywood
A sweep in Maywood usually means clearing creosote from wood-burning fireplaces that haven’t been touched in years, plus removing animal debris from uncapped flues. The dry climate means creosote sits undisturbed for months, hardening into a glaze that brushes alone won’t remove. We inspect the flue as part of the job, which is when a lot of Maywood homeowners learn for the first time that their chimney was built without a liner. See the full breakdown on our Chimney Sweep in Maywood page.
Dryer Vent Cleaning in Maywood
Clogged dryer vents are a leading cause of residential structure fires, and in Maywood’s tight-lot housing, a vent fire in one unit threatens the whole property. Small bungalows often have short, convoluted dryer vent runs or vents that terminate under eaves, where lint accumulates and blocks airflow. We treat dryer vent cleaning as fire prevention, not an add-on. Full detail is on our Dryer Vent Cleaning in Maywood page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Maywood
Maywood’s housing era makes chimney repair a frequent necessity: 1920s – 1950s masonry flues built without liners, original damper assemblies that have seized or rusted, and stucco walls constructed without modern fire-clearance distances. When a homeowner here burns wood regularly through winter, those conditions stop being theoretical and start being a smoke, draft, or fire hazard. We repair what we find using professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, the same lines chimney contractors stock in supply houses. See the full scope of what we repair on our Chimney Repair service page.
Chimney Cap Installation
Signs you need it
Rain water dripping into the firebox, animal sounds or debris in the flue, or a spark arrestor that’s rusted through are all signs a Maywood chimney needs a cap.
What it costs in Maywood
Chimney cap installation in Maywood typically runs $180 – $460 depending on the cap material, flue size, and roof access.
How we do it
We measure the flue, mount a properly sized cap with a spark arrestor, and secure it so Santa Ana winds can’t lift it.
Chimney Liner Installation
Signs you need it
Flaking tile shards in the firebox, smoke backing into the living room, or an inspection camera showing cracked or missing liner sections means the flue needs a liner.
What it costs in Maywood
Chimney liner installation in Maywood typically runs $2,200 – $5,800 depending on the flue height, liner material, and whether the old liner needs extraction first.
How we do it
We run a camera scope, size the liner to the existing flue, and install a DuraFlex stainless flexible liner sized for the appliance and clearances, then verify draft with a smoke test.
Chimney Flashing Repair
Signs you need it
Water staining on ceilings near the chimney, damp drywall around the chase, or visible rust and lifting at the roof line means the flashing has failed.
What it costs in Maywood
Chimney flashing repair in Maywood typically runs $300 – $800 depending on access, the length of flashing needing replacement, and whether the existing step flashing can be reused.
How we do it
We remove the old flashing, install new step and counter flashing sealed to the roofline, and re-secure the chimney-to-roof transition so water stops entering.
Chimney Crown Repair
Signs you need it
A spalling or cracked mortar crown, visible gaps where the crown meets the flue, or water pooling on top of the chimney means the crown needs repair.
What it costs in Maywood
Chimney crown repair in Maywood typically runs $250 – $1,200 depending on the crown size, crack severity, and whether a full recast is needed.
How we do it
We remove deteriorated crown material, re-form the crown with proper slope away from the flue, and seal the crown-to-flue joint so water runs off instead of soaking into the masonry.
What Chimney Repair Costs in Maywood
| Item | Typical range in Maywood |
|---|---|
| Chimney cap installation | $180 – $460 |
| Chimney flashing repair | $300 – $800 |
| Chimney crown repair | $250 – $1,200 |
| Chimney liner installation | $2,200 – $5,800 |
Do I always need a new liner, or can the existing one be repaired?
Not always. If the liner has hairline cracks or deteriorated mortar joints but the structure is sound, HeatShield resurfacing can restore the flue interior without a full liner replacement. A camera inspection tells us which route qualifies for your Maywood chimney. Call (855) 382-6159 for an exact assessment.
Can you fix a chimney that was built without a liner?
Yes. Many Maywood homes built in the 1920s through 1950s have raw masonry flues. We install DuraFlex stainless flexible liner systems sized to the existing flue and appliance, bringing the chimney to code-compliant venting without rebuilding masonry. Call (855) 382-6159 for a camera scope and quote.
Brands We Service in Maywood
We install and service materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. DuraFlex flexible liner systems handle older and complex flue configurations. HeatShield resurfacing restores deteriorated flue interiors where a full liner isn’t required. For the full list and what each system is built for, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Maywood, CA
| Service | Typical range in Maywood |
|---|---|
| Chimney sweep | $159 – $350 |
| Chimney cap installation | $180 – $460 |
| Chimney cap replacement | $220 – $600 |
| Chimney flashing repair | $300 – $800 |
| Chimney crown repair | $250 – $1,200 |
| Chimney liner installation | $2,200 – $5,800 |
| HeatShield resurfacing | $1,800 – $4,500 |
| Firebox repair | $400 – $1,800 |
| Smoke chamber repair | $800 – $2,400 |
| Dryer vent cleaning | $125 – $275 |
Two things push prices up in Maywood. The first is liner work in flues built without liners, where the camera scope turns a routine sweep into a code-compliance conversation. The second is roof access on older stucco bungalows with steep or tight roof lines. We give a flat price before any work begins, and every quote includes camera inspection and a photo report so you can see exactly what we’re seeing.
Neighborhoods We Serve in Maywood
Maywood’s one square mile packs a lot of variation into a small grid. We work across the entire city, including the residential streets along Slauson Avenue near the river, the bungalow blocks south of Atlantic Boulevard, and the older single-family pockets near Maywood City Hall and the parks. Response time for chimney work in Maywood is usually within a few business days, depending on whether we’re in a pre-season scheduling rush.
- Slauson Avenue corridor
- South of Atlantic Boulevard
- Near Maywood City Hall
- Maywood Riverfront area
- Streets around Maywood Park
Service Area – Cities Near Maywood
We serve the adjacent cities that share Maywood’s housing age and burn patterns. Many of the same 1920s – 1950s bungalow conditions show up in Bell, CA, Cudahy, CA, Commerce, CA, and Huntington Park, CA. If you’re right on the border, we’ll let you know the scheduling window for your area when you call.
Serving Maywood, CA — Our Local Coverage Area
We’re based in the Maywood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Maywood
Most Maywood chimney sweeps and repair estimates are scheduled within a few business days. During the pre-winter rush from late October through December, wait times stretch longer. Call (855) 382-6159 and we’ll give you the next open date for your ZIP, 90270.
Most chimney caps, flashing, crown repair, and liner installations don’t require a city permit in Maywood. Structural rebuilds or changes to the firebox opening may. We can tell you on the call what your job will need and whether the city needs to sign off. Call (855) 382-6159 with the scope of work.
Yes. If you want a chimney sweep, a repair evaluation, and a dryer vent cleaning in one visit, we schedule them together. One technician handles the chimney and flue work, and the dryer vent is cleaned by the same crew trained in combustion venting. Call (855) 382-6159 to book the combined visit.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Maywood Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Daniela Martinez"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Imani Dawson"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Veronica Flores