Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Fontana
Dryer vent cleaning in Fontana typically runs $129 – $229 for a single-family home, and most jobs take 45 – 90 minutes. We work throughout the 92335, 92336, 92337, and 92331 ZIP codes, from the older tracts south of Foothill Boulevard up through the newer subdivisions near the 210. If your dryer takes two cycles to finish a load or the laundry room smells like burnt lint, call us at (855) 382-6159 and we’ll get a technician out to your Fontana home.
Why Corona Chimney Sweep Is Fontana’s Preferred Dryer Vent Cleaning Company
We’re not a franchise outfit running generic crews through Fontana on a route. Our technicians know the housing stock here because they work it every week. Fontana is overwhelmingly post-war tract housing, large subdivisions of single-family homes from the 1960s through the 1980s, with another major wave in the 1990s and 2000s. That means thousands of prefab fireplaces, metal chases, and dryer vents installed when builders were more concerned with speed than with venting quality.
What separates us from a chimney-only shop is that we repair what we find. When a dryer vent inspection in a Fontana home turns up a crushed duct or a chase stuffed with lint, the same technician who found it can fix it. No referral, no second appointment, no handoff. Nolan Ferris built the company around that principle, and it matters in Fontana because so many older homes here hide venting failures behind drywall and inside prefab chases where you’ll never see them without a camera.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Fontana
Dryer Vent Cleaning
We clean the full vent run, from the dryer connection behind the appliance all the way to the exterior termination. In Fontana’s older 1960s and 70s tracts, that run is often longer and more convoluted than in newer construction, with elbows and offsets that collect lint at every bend. We use rotary brushes sized to your duct diameter and follow with a camera check so you can see the interior before we call the job done.
Dryer Vent Inspection
Every cleaning includes a camera inspection, but we also offer standalone inspections when you’re buying a Fontana home or when you’ve moved into one and don’t know the history of the vent. We look for disconnections, crushed sections, improper materials, and termination points blocked by caps degraded from Fontana’s summer heat. If the vent shares a prefab chase with a fireplace flue, we camera both runs separately because the symptoms overlap.
Dryer Vent Repair and Replacement
Flexible foil or plastic duct is common in older Fontana homes, and it fails. It crushes behind the dryer, sags between joists, and separates at the seams. We replace it with smooth-wall rigid pipe that resists lint accumulation and meets current code. When the original vent was routed through a prefab chase alongside the chimney flue, we reroute it clear of the chase so the two systems don’t contaminate each other.
Dryer Vent Termination and Cap Replacement
Fontana’s hot, dry climate and Santa Ana wind events are hard on exterior vent caps. Plastic louvers warp and stick. Bird and rodent nests plug the opening. A blocked termination point pushes lint back into the duct and the wall cavity. We replace degraded caps with proper backdraft-dampened models and seal the exterior penetration so wind-driven embers can’t enter.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fontana
We stock and install professional-grade venting materials from the same lines contractors source at supply houses, not big-box substitutes. For dryer vent repair and replacement in Fontana, that means smooth-wall rigid duct, proper connectors, and termination caps built to hold up under Inland Empire sun. When we encounter a deteriorated fireplace flue during a chase inspection, we can address it with HeatShield resurfacing or a DuraFlex stainless flexible liner rather than sending you to another company. The same crew handles both problems, which matters when the two systems share a chase in Fontana’s older homes.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Fontana Homes
- Shared prefab chases that hide lint. In Fontana’s 1960s and 70s tracts, builders sometimes ran the dryer vent through the same prefab chase as the fireplace flue. A clogged dryer vent then presents as a chimney draft problem, and the lint stays hidden inside the chase. We camera both runs before recommending any work.
- Crushed or disconnected flexible duct behind the dryer. The appliance gets pushed back against the wall, the foil duct collapses, and lint accumulates in the wall cavity where you can’t see it. Only a camera inspection catches this.
- Heat-degraded termination caps. Fontana summers cook plastic caps until the louvers warp or break off entirely. Once the cap fails, birds and rodents move in, and their nests create a full blockage.
- Long vent runs with multiple elbows. Many Fontana laundry rooms sit in the center of the house, so the vent run snakes through floor joists with three or four direction changes. Each bend collects lint faster than a short, straight run, which means these vents need cleaning more often than the typical once-a-year schedule.
On a 1968 tract home in the 92335 ZIP, our tech found the dryer vent terminating inside the prefab chimney chase. The flexible duct was crushed flat and coated with lint that had fused into a felt-like mat. We ran a camera through the chase, showed the homeowner the collapse on screen, and replaced the duct with smooth-wall pipe routed clear of the flue. No chimney work was needed. That’s the kind of finding a routine sweep misses and a camera inspection catches.
Pricing for Dryer Vent Cleaning in Fontana, CA
A standard dryer vent cleaning in Fontana runs $129 – $179 for a single-story home with a straight or mildly offset vent run. Two-story homes and vents over 15 feet with multiple elbows typically run $179 – $229. If the inspection reveals a crushed duct, a disconnection, or a failed cap, repair or replacement adds $90 – $250 depending on materials and access. Homes in the older 92335 and 92336 tracts where vents share a prefab chase sometimes need chase access work that pushes the total higher, and we’ll show you the camera footage before any repair is quoted. Estimates are free. Call (855) 382-6159 and we’ll give you a firm number before any work begins.
We Also Serve Cities Near Fontana
Our Dryer Vent Cleaning team works throughout the western Inland Empire. In addition to Fontana proper, we serve Bloomington, Rialto, Glen Avon, and Pedley on a regular basis. The housing patterns and venting failures in those communities are similar to what we see in Dryer Vent Cleaning in Fontana, so the same camera-first approach applies.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Fontana
You can’t tell from symptoms alone, and that’s the problem in Fontana’s older prefab-chase homes. A clogged dryer vent and a chimney draft failure produce overlapping signs: longer drying times, a musty or burnt smell in the laundry room, and visible lint at the exterior vent. When both systems share a chase, the backpressure from a blocked dryer vent can push lint-scented air into the fireplace flue and mimic a chimney problem. We camera both runs separately. That’s the only way to know which system is actually failing. Call (855) 382-6159 and we’ll inspect both in the same visit.
Because the original vents in those homes are often flexible foil or plastic duct, not the rigid metal pipe required today. They crush, separate, and collect lint at a rate that modern smooth-wall duct doesn’t. Worse, many were routed through the same prefab chase as the fireplace flue, which means a vent failure can go undetected inside a cavity you can’t access from the laundry room or the roof. A camera inspection is the only way to see what’s actually happening in those runs. If we find a problem, we can usually fix it the same visit.
Yes, in two specific ways. The summer heat degrades plastic termination caps faster than you’d see in coastal cities, so exterior louvers warp and stop sealing. And the long idle period through the hot season means any moisture or lint residue left in the duct from spring has months to compact and harden. When you start running the dryer again in fall, you’re pushing against a vent that’s been baking in place. A pre-season cleaning in September or October is the most reliable way to avoid a mid-winter blockage. Call us for a free estimate at (855) 382-6159.
A Level 1 chimney inspection covers the readily accessible portions of the fireplace and flue: the firebox, damper, smoke chamber, and the visible exterior. A dryer vent inspection covers the entire vent run from the appliance connection to the exterior termination, including sections inside walls and chases that you can’t see without a camera. They’re different systems with different failure modes. In Fontana’s shared-chase homes, we do both because a failure in one system can mask or mimic a failure in the other.
Yes, and we won’t recommend repair without it. Every dryer vent cleaning or inspection includes a camera run, and we’ll pull the footage up on a screen while you’re standing there. You’ll see the clog, the crushed section, the disconnected joint, or the nest blocking the termination. If the vent is clean and structurally sound, we’ll tell you that too. Nothing gets quoted that you haven’t seen with your own eyes. That policy has kept us honest in Fontana for years, and it’s why homeowners in the 92335, 92336, and 92337 ZIPs keep calling us back.
Written by Nolan Ferris, Owner at Corona Chimney Sweep, serving Fontana and the surrounding Inland Empire.
If your dryer vent hasn’t been inspected in the last year, or if you’re in an older Fontana home where the vent route is unknown, call (855) 382-6159 for a free estimate. We’ll camera the run, show you what we find, and fix it if it needs fixing.