Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Wrightwood
Wrightwood’s chimneys work harder than almost any in Southern California. At 6,000 feet, with winter nights routinely below freezing and snow piling up for months, the fireplaces and wood stoves in your cabin or chalet aren’t ambiance. They’re heat. That means creosote builds faster, flues take more thermal stress, and a chimney sweep isn’t a once-in-a-while courtesy. It’s a fire-safety obligation tied directly to how much you burn. Our team at Corona Chimney Sweep knows these mountain flues: the clay-tile liners cracked by decades of freeze-thaw cycles, the vintage cabins retrofitted with inserts, the second homes that sit empty until Thanksgiving then get pressed into daily service. Call (855) 382-6159 and we’ll get a technician to your Wrightwood property, camera in hand, to show you exactly what’s inside your chimney.
Why Corona Chimney Sweep Is Wrightwood’s Preferred Chimney Sweep Company
Wrightwood homeowners call us because we repair what we find. That’s the sentence that matters. A sweep-only crew can clean your flue and hand you a list of problems to take elsewhere. We don’t work that way. Nolan Ferris built Corona Chimney Sweep around a three-service scope: chimney sweeping, chimney repair, and dryer vent cleaning. The same technician who finds a deteriorated mortar joint or a spalled clay liner is qualified to fix it. No handoff. No second appointment. No gap where a problem sits unresolved while you wait for another contractor.
Wrightwood’s housing stock makes this especially important. So many homes here are 1920s-to-1960s cabins and chalets with masonry fireplaces that were never designed for the inserts and stoves later vented into them. When we open one of those flues, we expect to find things. And we have the camera to show you before we recommend a dollar of repair. Our Chimney Sweep team works on Wrightwood chimneys year-round, but fall is our busiest season up here, for obvious reasons: people light the first fire, smell something wrong, or realize they never got around to last year’s cleaning.
Being based in Corona doesn’t put us far from Wrightwood, and we schedule mountain runs in grouped routes to keep response times reasonable. When you call, you reach someone who knows what a Wrightwood chimney looks like inside: glazed creosote in smoke chambers, clay-tile liners with spalled joints, cracked crowns letting snowmelt into the masonry. That local familiarity means fewer surprises and faster diagnosis.
Styles & brands we work with





Chimney Sweep Services in Wrightwood
Chimney Sweep Services in Wrightwood start with removing creosote and soot from the flue interior, smoke chamber, and firebox. A typical sweep in Wrightwood runs $180 – $340 depending on flue height, creosote stage, and whether we’re also clearing a chimney cap or damper area. But in this mountain town, sweeping usually uncovers more than soot. It reveals what decades of real heating have done to the flue structure. That’s why our sweeps here always include a camera pass if we see anything that warrants a closer look.
Creosote Removal in Mountain Flues
Wrightwood’s long heating season produces creosote stages that valley homes rarely see. Dry pine and fir, burned for warmth rather than atmosphere, generate heavy smoke. When that smoke hits a cold flue on a sub-freezing night, it condenses into creosote fast. We remove first-degree soot and second-degree flakes with a brush. Third-degree glaze, which is common in Wrightwood, requires a rotary chain system to break it off safely. This is skilled work, not something to rush.

Annual Sweep Before Burn Season
If you burn wood as primary heat in a 92397 home, an annual sweep in September or early October is the correct cadence. Not because we want the repeat business. Because a flue that ran all winter has accumulated creosote you cannot see from the firebox. Second-home owners who only burn on weekends still need an annual inspection, because an unused chimney collects pest debris, and a used one still builds creosote. We’ll bring the camera and show you what’s actually in there.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Cleaning in Wrightwood
Chimney Cleaning in Wrightwood means more than running a brush up a flue. It’s the process of clearing all combustion byproducts from the firebox, smoke shelf, damper, flue, and chimney cap so your chimney drafts properly and burns safely. In Wrightwood, where many chimneys are original to 1940s and 1950s cabins, cleaning often involves working around clay-tile liners that have already begun to separate at the joints. A standard cleaning in Wrightwood typically costs $150 – $250; if third-degree creosote or heavy debris loading is present, the job takes longer and the price reflects that extra labor.
Full Flue Cleaning and Camera Verification
After we remove the creosote, we inspect. Every Wrightwood chimney we clean gets a visual check of the flue interior. If we suspect liner damage, we run a camera before recommending anything. That camera footage is yours to see. We don’t recommend a liner replacement or resurfacing because we “think” something looks wrong. You watch the video with us and see the spalled joints or the gap behind a cracked tile for yourself.
Fireplace Cleaning for Year-Round Homeowners
If you live in Wrightwood full-time and burn throughout the snow season, you know how much ash and soot one winter produces. We clean the firebox, remove ash and debris, inspect the damper operation, and make sure the smoke draws correctly before the next cold snap. A dirty firebox is not a safety issue by itself. The flue above it is. That’s what we’re actually there to clean.
Trusted Brands We Service in Wrightwood
Wrightwood chimneys carry a mix of components installed over decades. Many older cabins have original clay-tile liners, but plenty have been retrofitted with modern systems. We install and service DuraFlex flexible stainless liners, which are the right solution when an older chimney configuration can’t accept rigid pipe. For flues with hairline cracks and deteriorated mortar joints, we use HeatShield resurfacing, which restores the interior without a full liner replacement in qualifying chimneys. We also work with Gelco and Olympia Chimney components where local supply matters. If your chimney has any of these systems, we know how to service them properly, including sourcing the right replacement parts without waiting weeks for a distributor.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Wrightwood Homes
- Heavily glazed creosote from primary wood heat. Homes that burn wood all winter through sub-freezing nights create the ideal conditions for third-degree creosote. It forms as a hard, tar-like glaze in the smoke chamber and upper flue. Brushing won’t remove it. We use rotary chains, then show you the inside on camera.
- Unlined or deteriorated clay-tile flues in older cabins. Wrightwood’s freeze-thaw cycles crack clay tiles over decades. Once the joints spall, creosote and heat can reach the masonry behind the liner. This is a fire hazard that sweeping alone cannot fix. HeatShield resurfacing or a DuraFlex liner is sometimes the answer, but only after camera evidence confirms the damage.
- Inserts vented into flues never designed for them. We regularly open chimneys where a wood stove insert was pushed into a stack sized for an open fireplace. The flue is too large or too deteriorated for the insert’s draft requirements. The result is poor drafting and rapid creosote accumulation. A Level 2 inspection catches this.
- Pest debris and snowmelt damage in second homes. Empty cabins in Wrightwood collect bird nests, pine needles, and rusted dampers between visits. Cracked chimney crowns let snowmelt seep into the masonry, and the freeze-thaw cycle does the rest. When you open the cabin for the season, the chimney needs checked before the first fire.
Pricing for Chimney Sweep in Wrightwood, CA
A standard chimney sweep in Wrightwood runs $180 – $340. A basic cleaning with no complications typically falls at $150 – $250. If we find third-degree creosote requiring rotary chain removal, expect the higher end of the range. A Level 1 inspection is included with every sweep; a Level 2 inspection, which we recommend for older Wrightwood cabins, real estate transactions, or after any chimney event, runs an additional $150 – $300. If we identify liner damage, HeatShield resurfacing and DuraFlex liner installation each start around $2,500 – $5,000 depending on flue length and access. We quote before we start. We don’t bill a single dollar of repair without camera footage you have seen and approved. Call (855) 382-6159 for a free estimate on any service in Wrightwood.
We Also Serve Cities Near Wrightwood
Our technicians regularly run routes from Wrightwood down through Wrightwood and into the surrounding high desert communities. We cover Piñon Hills, Phelan, Oak Hills, and San Antonio Heights with the same camera-first approach and repair capability. If your home sits anywhere in the San Gabriel Mountain foothills or the high desert edge, we can schedule you on our next route.
Serving Wrightwood, CA — Our Local Coverage Area
We’re based in the Wrightwood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Wrightwood
An annual inspection matters even more for part-time cabins because the chimney sits unused for long stretches, collecting dust, insect debris, and sometimes bird or squirrel nests. The bigger issue is that when you do burn, you might unknowingly be burning against creosote left from last year that you’d forgotten about. An unused flue doesn’t clean itself. A quick inspection costs far less than the repair that comes from ignoring a blockage or spalled liner. Call (855) 382-6159 to schedule an inspection before your next weekend up the mountain.
You usually can’t tell from the outside. Signs include small pieces of clay tile collecting in the firebox, visible gaps or cracks when you look up the flue with a flashlight, or a persistent smoky smell even when the damper is closed. But the reliable way to know is a camera inspection. We run a camera up the flue and show you the footage. In Wrightwood’s older cabins, freeze-thaw damage to clay-tile liners is common, and the only honest diagnosis is visual. Call us and we’ll show you exactly what’s in there.
First-degree creosote is a light, flaky soot that brushes off easily. Second-degree is a granular, tar-like deposit requiring firmer mechanical removal. Third-degree is a hard, glossy glaze that forms under specific conditions: long burns, low flue temperatures, and heavy wood heat. Wrightwood produces third-degree creosote regularly because homes here burn for warmth in cold weather, not for occasional ambiance. Third-degree creosote is highly combustible and cannot be removed with a standard brush. It requires rotary chain equipment. If you’re burning daily through Wrightwood winters, get the flue checked before the season starts.
We can, and we routinely do. A cracked mortar crown gets repaired with proper crown resurfacing material, not just smeared with sealant. A rusted or seized damper gets replaced with a cast-iron or stainless unit sized to your flue. These are chimney repairs, which is a core service for us, not a referral. We’ll fix what we find on the same visit when parts are available. The repair gets quoted, you approve it, and the same technician handles it. No separate contractor, no waiting weeks for someone else to show up.
We service and install DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield components. These are the professional-grade lines stocked in contractor supply houses, which matters when a Wrightwood cabin needs a matching part or a code-compliant retrofit. If your chimney has an older insert or liner from one of these manufacturers, we can typically source parts without the long delays that come from waiting on a distributor. DuraFlex flexible stainless liners and HeatShield resurfacing are the two systems we install most often in Wrightwood, because so many of these older flues need exactly that kind of precise fix.
Ready to get your Wrightwood chimney cleaned and inspected before the snow season? We’ll bring the camera, show you what’s inside, and repair what needs repairing with no handoffs. Call (855) 382-6159 for a free estimate.
Written by Nolan Ferris, Owner at Corona Chimney Sweep, serving Wrightwood and the San Gabriel Mountain communities with camera-documented chimney inspections and in-house repair since day one.