Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Wrightwood, CA
Wrightwood’s chimneys work harder than almost any in Southern California. At 6,000 feet between the Mojave Desert and the LA Basin, this mountain town burns wood for primary heat through long, snowy winters, not for the occasional evening fire. That means the creosote loading, liner wear, and crown freeze-thaw damage we see here matches mountain-community conditions you’d find in the Sierra or Rockies, not the suburbs an hour downhill. Corona Chimney Sweep has served Wrightwood since 2018, and our work here leans heavily toward structural repair and heavy-glaze removal. Call (855) 382-6159 for a free estimate.
Why Wrightwood Homes Are Different
Wrightwood is a high-elevation San Gabriel Mountains resort town, and its housing stock tells the story: older mountain cabins, chalets, and second homes built as the town grew from a 1920s-era mountain resort. Many of these homes have masonry fireplaces and inserts that were added or retrofitted over decades, often with mixed code eras and materials patched together by previous owners. A chimney in a 1940s cabin on a hillside off Highway 2 is not the same job as a chimney in a 1990s tract home flat on a valley pad.
The climate is the other variable. Wrightwood sees heavy winter snowfall and sub-freezing nights, then swings back into dry mountain air that dries out mortar and thins out flashing seals. Masonry chimneys here take a beating: water gets into the crown, freezes overnight, expands, and chips away at the structure. We see freeze-thaw spalling on chimney crowns more often in Wrightwood than anywhere else we work. Creosote also builds differently at this elevation. A wood stove running hot and long through January produces a hard, glossy creosote glaze that street sweeps don’t remove. Wrightwood chimneys need more aggressive mechanical cleaning than coastal fireplaces, and the cleaning cadence is tied to how many cords of wood the household actually burns each season.
Part-time occupancy adds a complication. Many Wrightwood homes are second properties that sit empty for weeks or months between visits. We routinely open flues that owners believe were clean last season and find debris, pest nests, and heavy creosote that nobody saw coming. In Wrightwood, the real cleaning cycle is tied to occupancy, not just burn volume.
Styles & brands we work with
Our Main Wrightwood Services
Most Wrightwood homeowners call us first for one of two things: a thorough chimney sweep before burning season, or dryer vent cleaning after discovering lint buildup behind the dryer. Both are fire-prevention services, and both have their own Wrightwood pages linked below.
Chimney Sweep in Wrightwood
A Wrightwood chimney sweep has to remove more than surface soot. With wood stoves and fireplaces running as primary heat, glazed creosote forms in the flue and smoke chamber, and it doesn’t brush off with a standard wire brush. We use mechanical rotary tools on glazed deposits, then inspect the liner and smoke chamber for cracks that let heat reach framing. Cabin chimneys without full clean-outs, common in older Wrightwood homes, get extra attention because access to the flue base is limited. Read more at Chimney Sweep in Wrightwood.
Dryer Vent Cleaning in Wrightwood
A clogged dryer vent is a fire waiting to happen, and Wrightwood’s part-time cabin occupancy makes it worse. Lint builds up in vents that never get checked because the home sits empty, then the first heavy laundry load of a ski weekend pushes that lint against a hot dryer exhaust. We clean the full vent run from dryer to exterior termination, clear blockages at the wall cap, and confirm proper airflow with a draft test. It’s the same fire-prevention standard we apply to chimneys. Read more at Dryer Vent Cleaning in Wrightwood.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Wrightwood
In Wrightwood, chimney repair is rarely cosmetic. The town’s older masonry fireplaces take direct hits from freeze-thaw cycles, and flue liners in vintage cabins crack under repeated high-heat loads from full-time wood burning. When we sweep a Wrightwood chimney and find a deteriorated liner or a spalled crown, we repair it in-house, same crew, no handoff to a referral. That’s a meaningful difference in a mountain community where a second contract means another weather window and another trip up the hill. Our repair work is the core of what we do, and it’s covered at the service level on our Chimney Repair page.
Chimney Cap Installation
Signs you need it
Water streaking down the flue, rust stains on the damper, or evidence of birds or rodents nesting in the flue means the chimney has no cap or a failed cap.
What it costs in Wrightwood
Chimney cap installation in Wrightwood typically runs $200 – $500 depending on flue size, cap material, and whether mounting brackets need custom fitting on an older masonry crown.
How we do it
We measure the flue dimensions, select a stainless steel or galvanized cap from Famco, Olympia, or Copperfield stock, secure it to the flue tile or crown, and verify draft airflow isn’t restricted.
Chimney Crown Repair
Signs you need it
Chipped, spalled, or cracked mortar across the top of the chimney, especially with visible freeze-thaw damage from Wrightwood’s winter cycles, means the crown is no longer shedding water.
What it costs in Wrightwood
Chimney crown repair typically runs $450 – $1,600 in Wrightwood depending on crown size, crack extent, and whether we’re resurfacing with a Gelco crown sealer or rebuilding sections.
How we do it
We either apply a Gelco waterproof crown sealer over a stabilized base or remove and repour damaged sections, then add a sloped finish that sheds water away from the flue.
What Chimney Repair Costs in Wrightwood
| Item | Typical range in Wrightwood |
|---|---|
| Chimney crown repair | $450 – $1,600 |
| Chimney cap installation | $200 – $500 |
| Flue liner resurfacing (HeatShield) | $1,200 – $3,500 |
Do I need a new liner, or can the existing one be repaired?
Often the liner can be resurfaced instead of replaced. If the flue has deteriorated mortar joints or hairline cracks, HeatShield resurfacing restores a continuous smooth surface without a full tear-out. Full replacement is only needed when the liner is structurally collapsed or the flue size won’t handle the appliance. We show you the camera footage before recommending either path.
How urgent is a cracked chimney crown in Wrightwood?
At this elevation, cracked crowns get worse every winter. Water penetrates the crown, freezes, expands, and spalls more masonry off the top of the chimney. That widening gap lets water reach the flue and the interior wythe of the chimney, which can rot framing and shatter flue tiles. Repairing a crown is far cheaper than rebuilding a chimney, so don’t defer it through another snowfall. Call (855) 382-6159 for an exact quote on your chimney.
Brands We Service in Wrightwood
We install and service materials from contractor-grade lines, not big-box substitutes. DuraFlex stainless flexible liners let us retrofit older Wrightwood chimneys with code-compliant venting, and HeatShield resurfacing restores flue interiors without full replacement where conditions qualify. Gelco crown sealers hold up to Wrightwood’s extreme freeze-thaw exposure, and Olympia caps and dampers stand up to mountain wind and snow. Parts are stocked locally, and we can typically secure specialty items within a few days. See our brands for the full line.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Wrightwood, CA
| Service | Typical range in Wrightwood |
|---|---|
| Chimney sweep (standard, open fireplace) | $100 – $200 |
| Chimney sweep (wood stove or insert) | $125 – $250 |
| Chimney sweep with glazed creosote removal | $250 – $500 |
| Chimney cap installation | $200 – $500 |
| Chimney cap replacement | $250 – $600 |
| Chimney crown repair | $450 – $1,600 |
| Chimney flashing repair | $300 – $900 |
| Chimney liner installation (DuraFlex) | $2,500 – $6,000 |
| HeatShield flue resurfacing | $1,200 – $3,500 |
| Dryer vent cleaning | $90 – $180 |
Glazed creosote, inaccessible flue bases, and badly spalled crowns push Wrightwood chimney work toward the upper end of these ranges. The mountain roads and cabin layouts here also add some labor time compared to valley jobs. Every job gets a flat price before we start, so there are no surprises when the bill comes.
Neighborhoods We Serve in Wrightwood
We cover all of the 92397 ZIP and the surrounding mountain roads within reach of Wrightwood. Most of our jobs are on single-family cabins and chalets with freestanding masonry chimneys or wood stove flues, often on steep lots that require ladder work and roof access.
- Downtown Wrightwood / Park Drive area
- Mountain High area / Table Mountain Road
- Lone Pine Canyon Road corridor
- Desert Front Road / Mountain Top Junction
- Sheep Creek Drive and surrounding slopes
We schedule Wrightwood trips in advance and typically run crews here on a weekday rotation, with extra availability in September and October before the first snow.
Service Area – Cities Near Wrightwood
From our base in Corona, we also cover the High Desert and foothill communities around Wrightwood. Homeowners in Piñon Hills, CA and Phelan, CA call us for the same mountain-adjacent chimney conditions, while Oak Hills, CA and San Antonio Heights, CA see more desert-dry mortar and cap issues. If you’re anywhere along the 138 corridor or the Cajon Pass side, we can schedule your sweep or repair on the same route.
Serving Wrightwood, CA — Our Local Coverage Area
We’re based in the Wrightwood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Wrightwood
We schedule Wrightwood jobs on weekdays and watch the forecast closely. Heavy snow and ice make roof access unsafe, so we’ll call ahead if a storm window closes in. The best time to book is September through early November, before burn-season demand peaks and before the snowpack locks in. Call (855) 382-6159 to get on the fall schedule early.
Most routine sweeps and component replacements like caps, dampers, and crown resurfacing don’t require a permit. Major liner installations or structural rebuilds can trigger local building requirements in San Bernardino County. We’ll tell you exactly what’s needed for your specific job before any work starts, and we handle the code-compliant side of the installation.
Yes, and that’s a lot of what we do in Wrightwood. Cabin and second-home chimneys that sit unused for long stretches usually need debris removal, glazed creosote treatment, and a full camera inspection before they’re safe to burn. We’ll open the damper, run the flue camera, and give you a plain-language walkthrough of what we found, with photos. Nothing gets recommended that you can’t see for yourself.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wrightwood Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Jodi Brooks"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Marcy Padgett"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Raj Patel